The display l2protocol-tunnel group-mac command displays Layer 2 protocol tunneling information.
display l2protocol-tunnel group-mac { all | protocol }
Displays Layer 2 protocol tunneling information for all Layer 2 protocols.
-
Displays Layer 2 protocol tunneling information for a specified Layer 2 protocol.
The protocol as follows:
One or up to all of the preceding Layer 2 protocols can be specified.
All views
1: Monitoring level
Usage Scenario
To view Layer 2 protocol tunneling information after Layer 2 protocol tunneling is configured, run the display l2protocol-tunnel group-mac command.
Precautions
In VS mode, this command is supported only by the admin VS.
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display l2protocol-tunnel group-mac all Protocol Protocol-MAC Group-MAC ----------------------------------------------------------------------------- lldp 0180-c200-000e 00e0-fc12-3456 stp 0180-c200-0000 00e0-fc12-3457 cdp 00e0-fc12-3459 00e0-fc12-3458
Tunneled Layer 2 protocol name.
Multicast destination MAC address in tunneled Layer 2 PDUs.
Multicast MAC address (group MAC address) specified to replace the multicast destination MAC address in tunneled Layer 2 PDUs.