display pnp-state

Function

The display pnp-state command displays information about the PnP status of APs managed by a master.

Format

display pnp-state [ esn-value ]

Parameters

Parameter	Description	Value
esn-value	Displays information about the PnP status of an AP with a specified ESN.	The value is a string of 1 to 64 case-sensitive characters, spaces not supported.

Parameter

Description

Value

esn-value

Displays information about the PnP status of an AP with a specified ESN.

The value is a string of 1 to 64 case-sensitive characters, spaces not supported.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
dcn	read

Usage Guidelines

Usage Scenario

To view information about the PnP status of APs managed by a master, run the display pnp-state command. The information includes the ESN, PnP status, and number of APs managed by the master.

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about the PnP status of all APs managed by a master.

<HUAWEI> display pnp-state
Total Number:1
-----------------------------------------------
ESN                              PNP-State
-----------------------------------------------
56186168213402                   Finish    
-----------------------------------------------

**Table 1** Description of the **display pnp-state** command output
Item	Description
Total Number	Number of APs managed by the master.
ESN	ESN of the AP.
PNP-State	PnP status: Init: PnP is in the initial state. Start: PnP is in the starting state. Finish: PnP is in the finished state.