display lpt ptp

Function

The display lpt ptp command displays point-to-point LPT information on an interface.

Format

display lpt ptp [ interface { ifName | interface-type interface-number } ]

Parameters

Parameter	Description	Value
interface ifName	Specifies the name of an interface.	-
interface interface-type interface-number	Specifies the type and number of an interface.	-

Parameter

Description

Value

interface ifName

Specifies the name of an interface.

interface interface-type interface-number

Specifies the type and number of an interface.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
lpt	read

Usage Guidelines

To view point-to-point LPT information on an interface, run the display lpt ptp command. This information includes user-side interface information, network-side interface information, protocol status, recovery time, interface hold-off time, OAM detection period, and user-side interface status.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display point-to-point LPT information.

<HUAWEI> display lpt ptp
Item                               Value
----------------------------------------------------
 User-Side Port                   : GigabitEthernet0/1/1

 Network-Side Carrier Type        : PW
 Network-Side PW Peer IP Address  : 4.4.4.4
 Network-Side PW VC ID            : 35000
 Network-Side PW VC type          : Ethernet
 User-Side Port Status            : Open
 Protocol Status                  : Init
 Enable Status                    : Disabled
 Recovery Time(s)                 : 1
 Hold-Off Time(ms)                : 1000
 Network-Side Fault Detection Mode: LPT OAM
 OAM Detection Period(100ms)      : 10
 Notification Mode                : LPT MODE

**Table 1** Description of the **display lpt ptp** command output
Item	Description
User-Side Port	User-side interface.
User-Side Port Status	User-side interface status.
Network-Side Carrier Type	Network-side bearer type.
Network-Side PW Peer IP Address	Peer IP address of the network-side PW.
Network-Side PW VC ID	VC ID of the network-side PW.
Network-Side PW VC type	VC type of the network-side PW.
Network-Side Fault Detection Mode	Network-side fault detection mode.
Protocol Status	LPT status.
Enable Status	Enabling status of LPT.
Recovery Time(s)	LPT recovery time (seconds).
Hold-Off Time	LPT interface hold-off time.
OAM Detection Period(100ms)	OAM detection period (100ms).
Notification Mode	LPT fault notification mode.