display l2tpv3 statistics pw

Function

The display l2tpv3 statistics pw command displays packet statistics about L2TPv3 tunnels.

Format

display l2tpv3 statistics pw pwname

Parameters

Parameter	Description	Value
pwname	Displays information about a specified L2TPv3 tunnel.	The value is a string of 1 to 19 case-sensitive characters beginning with a letter, spaces or question marks (?) not supported.

Parameter

Description

Value

pwname

Displays information about a specified L2TPv3 tunnel.

The value is a string of 1 to 19 case-sensitive characters beginning with a letter, spaces or question marks (?) not supported.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
l2tpv3	read

Usage Guidelines

Usage Scenario

To check packet statistics about an L2TPv3 tunnel for troubleshooting, run the display l2tpv3 statistics pw command.

Prerequisites

L2TPv3 has been enabled using the l2tpv3 enable command.

An L2TPv3 tunnel has been configured using the l2tpv3 pw command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display packet statistics about an L2TPv3 tunnel named huawei.

<HUAWEI> system-view
[~HUAWEI] display l2tpv3 statistics pw huawei
L2TPv3 Tunnel Name is huawei
Tunnel Details:
  Send: 0 bytes, 0 packets   
  Receive: 0 bytes, 0 packets    
  Receive packets dropped: 0
  Cookie mismatch: 0

**Table 1** Description of the **display l2tpv3 statistics pw** command output
Item	Description
Tunnel Details	Detailed information about tunnels.
Receive	Number of received packets.
Receive packets dropped	Number of packets dropped after being received.
Cookie mismatch	Number of packets discarded due to cookie value mismatch.
Send	Number of sent packets.