display y1731 eth-bn

Function

The display y1731 eth-bn command displays information about ETH-BN packets on the receive end.

Format

display y1731 eth-bn md md-name ma ma-name mep mep-id

Parameters

Parameter	Description	Value
ma ma-name	Specifies the name of an MA.	The value is a string of 1 to 43 characters, hyphens (-) and question marks (?) not supported.
mep mep-id	Specifies the ID of a MEP.	The value is an integer ranging from 1 to 8191.
md md-name	Specifies the name of an MD.	The value is a string of 1 to 43 characters, hyphens (-) and question marks (?) not supported.

Parameter

Description

Value

ma ma-name

Specifies the name of an MA.

The value is a string of 1 to 43 characters, hyphens (-) and question marks (?) not supported.

mep mep-id

Specifies the ID of a MEP.

The value is an integer ranging from 1 to 8191.

md md-name

Specifies the name of an MD.

The value is a string of 1 to 43 characters, hyphens (-) and question marks (?) not supported.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
y1731	read

Usage Guidelines

Usage Scenario

If routing devices connect to microwave devices and the ETH-BN receiving function is enabled, run the display y1731 eth-bn command to view information about ETH-BN packets on the receive end.

Prerequisites

An MD, MA and MEP have been created using the cfm md, ma, and mep mep-id commands, respectively.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about ETH-BN packets on MEP1.

<HUAWEI> display y1731 eth-bn md md1 ma ma1 mep 1
 Source MAC         : 00e0-fc12-7890
 Port ID            : 1
 Bandwidth          : 3(M)

**Table 1** Description of the **display y1731 eth-bn** command output
Item	Description
Source MAC	Source MAC address for sending ETH-BN packets.
Port ID	Interface ID for sending ETH-BN packets.
Bandwidth	Interface bandwidth.