display debugging ipfpm-dcp

Function

The display debugging ipfpm-dcp command displays the DCP debugging status.

display debugging ipfpm-dcp

None

All views

3: Management level

Task Name	Operations
ipfpm	debug

Usage Scenario

To check whether debugging is enabled or disabled for a DCP in the IP FPM model, run the display debugging ipfpm-dcp command in all views.

The actual command output varies according to the device. The command output here is only an example.

# Display the DCP debugging status.

<HUAWEI> system-view
[~HUAWEI] display debugging ipfpm-dcp
IPFPM DCP packet debugging switch is on