display dhcpv6 snooping interface

Function

The display dhcpv6 snooping interface command displays DHCPv6 snooping running information.

Format

display dhcpv6 snooping interface { interface-name | interface-type interface-num }

Parameters

Parameter	Description	Value
interface interface-type interface-num	Specifies the interface type and number.	-
interface interface-name	Specifies the name of an interface.	-

Parameter

Description

Value

interface interface-type interface-num

Specifies the interface type and number.

interface interface-name

Specifies the name of an interface.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
dhcp	read

Usage Guidelines

Usage Scenario

After DHCPv6 snooping is configured, you can run the display dhcpv6 snooping interface command to view DHCPv6 snooping running information.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display DHCPv6 snooping running information on GE 0/1/0.

<HUAWEI> display dhcpv6 snooping interface GigabitEthernet 0/1/0
 dhcpv6 snooping enable
 dhcpv6 snooping check ipv6 enable
 ipv6 total                   0

**Table 1** Description of the **display dhcpv6 snooping interface** command output
Item	Description
dhcpv6 snooping enable	DHCPv6 snooping is enabled on the interface.
dhcpv6 snooping check ipv6 enable	IPv6 packet check has been enabled.
ipv6 total	Total number of discarded IPv6 packets.