display ipfpm dcp

Function

The display ipfpm dcp command displays data collecting point (DCP) configurations.

Format

display ipfpm dcp

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ipfpm	read

Usage Guidelines

Usage Scenario

To check whether DCP configurations are correct, run the display ipfpm dcp command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display DCP configurations.

<HUAWEI> display ipfpm dcp
Specification Information(Main Board):
 Max Instance Number                       :64
 Max 10s Instance Number                   :64
 Max 1s Instance Number                    :8
 Max TLP Number                            :512
 Max TLP Number Per Instance               :8
 
Configuration Information:       
 DCP ID                                    : 1.1.1.1       
 Loss-measure Flag                         : tos-bit3        
 Delay-measure Flag                        : tos-bit4   
 Authentication Mode                       : --        
 Test Instances MCP ID                     : 1.1.1.1     
 Test Instances MCP Port                   : 2048       
 Current Instance Number                   : 1

**Table 1** Description of the **display ipfpm dcp** command output
Item	Description
Specification Information(Main Board)	Specifications for the IPU.
Max 10s Instance Number	Maximum number of IP FPM instances with the period of 10 seconds supported by the main control board.
Max 1s Instance Number	Maximum number of IP FPM instances with the period of 1 second supported by the main control board.
Max Instance Number	Maximum number of IP FPM instances supported by the IPU.
Max TLP Number	Maximum number of TLPs supported by the IPU.
Max TLP Number Per Instance	Maximum number of TLPs supported by each IP FPM instance on the IPU.
Configuration Information	DCP configurations.
DCP ID	Data collecting point ID.
Loss-measure Flag	Packet loss measurement flag: tos-bit3: third bit in the ToS field of the IPv4 packet header. tos-bit4: fourth bit in the ToS field of the IPv4 packet header. tos-bit5: fifth bit in the ToS field of the IPv4 packet header. tos-bit6: sixth bit in the ToS field of the IPv4 packet header. tos-bit7: seventh bit in the ToS field of the IPv4 packet header. flag-bit0: Bit 0 in the Flags field of the IPv4 packet header.
Delay-measure Flag	Delay measurement flag: tos-bit3: third bit in the ToS field of the IPv4 packet header. tos-bit4: fourth bit in the ToS field of the IPv4 packet header. tos-bit5: fifth bit in the ToS field of the IPv4 packet header. tos-bit6: sixth bit in the ToS field of the IPv4 packet header. tos-bit7: seventh bit in the ToS field of the IPv4 packet header. flag-bit0: Bit 0 in the Flags field of the IPv4 packet header.
Authentication Mode	Authentication mode for the DCP: hmac-sha256: HMAC-SHA256 authentication. --: non-authentication.
Test Instances MCP ID	Measurement control point ID in the IP FPM instance.
Test Instances MCP Port	User Datagram Protocol port number used by the DCP to communicate with the MCP in the IP FPM instance.
Current Instance Number	Number of IP FPM instances.