The actual command output varies according to the device. The command output here is only an example.
# Display information about the update peer-groups in a BGP-EVPN address family.
<HUAWEI> display bgp evpn update-peer-group
The EVPN instance's update peer group number : 1
Keep buffer update peer group number : 0
BGP Version : 4
Group ID : 1
Group Type : internal
Addr Family : EVPN AdvMinTimeVal : 0
Total Peers : 1
Leader Peer : 10.44.44.88
Table 1 Description of the display bgp evpn update-peer-group command output
| Item |
Description |
| The EVPN instance's update peer group number |
Number of update peer-groups in the EVPN instance.
|
| Keep buffer update peer group number |
Number of update peer-groups stored in the buffer.
|
| BGP Version |
BGP version.
|
| Group ID |
ID of an update peer-group.
|
| Group Type |
Type of an update peer-group:
- external: indicates an EBGP peer update peer-group.
- internal: indicates an IBGP peer update peer-group.
- unknown: indicates an unknown update peer-group.
|
| Addr Family |
Address family.
|
| AdvMinTimeVal |
Minimum interval at which Update packets with the same route prefix are sent.
|
| Total Peers |
Total number of peers in an update peer-group.
|
| Leader Peer |
Representative of an update peer-group.
|