display bgp routing-table (condition)

Function

The display bgp routing-table command displays related information about BGP routes.

Format

display bgp routing-table network { mask-length | mask }

display bgp routing-table network { mask-length | mask } longer-prefixes

display bgp labeled routing-table network { mask-length | mask }

display bgp labeled routing-table network { mask-length | mask } longer-prefixes

Parameters

Parameter	Description	Value
network	Specifies an IPv4 address of destination.	The value is in dotted decimal notation.
mask-length	Specifies the mask length of an IPv4 address.	The value is an integer ranging from 0 to 32.
mask	Specifies the mask of an IPv4 address.	The value is in dotted decimal notation.
longer-prefixes	Matches according to the mask longer than the specified length.	-
labeled	Labeled route information.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
bgp	read

Usage Guidelines

Usage Scenario

To view the information about routes in the BGP routing table, run the display bgp routing-table command with specified parameters.

Precautions

During route flapping, the route statistics may differ from the actual number of routes on the network because some routes are still on the way.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display public network routes.

[~HUAWEI] display bgp routing-table 10.1.1.1
 
 BGP local router ID : 10.1.1.2
 Local AS number : 100
 Paths:   1 available, 1 best, 1 select, 0 best-external, 0 add-path
 BGP routing table entry information of 10.1.1.1/32:
 Label information (Received/Applied): 48073/NULL
 From: 10.10.1.1 (10.1.1.2)  
 Route Duration: 0d00h45m10s
 Relay IP Nexthop: 10.1.1.1
 Relay IP Out-Interface: Loopback0
 Relay Tunnel Out-Interface: Loopback0
 Original nexthop: 10.10.1.1
 Qos information : 0x0
 Community: <1:1>
 Ext-Community: Color <0 : 3>
 Large-Community: <1:1:1>
 AS-path Nil, origin incomplete, MED 33, localpref 100, pref-val 0, valid, internal, best, select, pre 255, IGP cost 10
 Originator: 10.3.1.1
 Cluster list: 0.0.0.100
 Not advertised to any peer yet

**Table 1** Description of the **display bgp routing-table (condition)** command output
Item	Description
Route Duration	Timestamp of a route.
Relay IP Nexthop	IP address of the next hop to which a route is recursed.
Relay Tunnel Out-Interface	Name of the tunnel to which a route recurses.
IP Out-Interface	Name of a route's outbound interface.
MED	MED of routes.
Cluster list	Cluster_List.
Origin	Route origin.
From	Source peer that sent the route.