display bgp sr-policy routing-table
Function
The display bgp sr-policy routing-table command displays information about routes in a BGP IPv4 SR-Policy address family.
Example
The actual command output varies according to the device. The command output here is only an example.
# Display information about routes in a BGP IPv4 SR-Policy address family.
<HUAWEI> display bgp sr-policy routing-table
BGP Local router ID is 10.1.1.1
Status codes: * - valid, > - best, d - damped, x - best external, a - add path,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total Number of Routes: 1
Network Nexthop MED LocPrf PrefVal Path/Ogn
*> [10][10][10.10.10.10] 127.0.0.1 0 0 ?
| Item | Description |
|---|---|
| BGP Local router ID | Local router ID of BGP. |
| Total Number of Routes | Number of BGP Flow Specification routes. |
| Network | BGP route prefix. |
| Nexthop | Nexthop IP address. |
| MED | MED of the route. |
| LocPrf | Local_Pref of the route. |
| PrefVal | PrefVal of the route. |
| Path/Ogn | AS_Path and origin of the route. |