display bgp sr-policy ipv6 routing-table
Function
The display bgp sr-policy ipv6 routing-table command displays information about the IPv6 SR-Policy routes.
Example
The actual command output varies according to the device. The command output here is only an example.
# Display information about the IPv6 SR-Policy routes.
<HUAWEI> display bgp sr-policy ipv6 routing-table
BGP Local router ID is 1.1.1.1
Status codes: * - valid, > - best, d - damped, x - best external, a - add path,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V - valid, I - invalid, N - not-found
Total Number of Routes: 1
Network Nexthop MED LocPrf PrefVal Path/Ogn
*> [46][46][8::8] ::1 0 0 ?
| Item | Description |
|---|---|
| BGP Local router ID is | ID of the local BGP device. |
| Network | Destination network or host address of the route. [46][46][8::8] represents [distinguisher][policycolor][endpoint], standing for length of the NLRI, color value of the associated SR-MPLS TE Policy and endpoint information about the associated SR-MPLS TE Policy. |
| Nexthop | Next hop IP address used to forward packets. |
| MED | MED of a BGP route. |
| LocPrf | Local_Pref of a BGP route. |
| PrefVal | PrefVal. |
| Path/Ogn | AS_Path number or the Origin attribute. |