display bgp vpnv4 routing-table attr-set
Function
The display bgp vpnv4 routing-table attr-set command displays Attr_Set information about BGP VPNv4 routes and BGP VPN routes.
Parameters
| Parameter | Description | Value |
|---|---|---|
| ipv4-address |
Specify an IPv4 network address. |
The value is in dotted decimal notation. |
| mask |
Specify an IPv4 network mask. |
The value is in dotted decimal notation. |
| mask-length |
Length of IP address mask. |
The value is an integer ranging from 0 to 32. |
| vpn-instance vpn-instance-name |
Specify a VPN-Instance (VRF) name. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. In addition, the VPN instance name must not be _public_. When double quotation marks are used around the string, spaces are allowed in the string. |
| all |
Display all information on VPNv4 and VPN instance. |
- |
Example
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display bgp vpnv4 all routing-table 10.10.10.10 attr-set
Routes of Route Distinguisher(100:1):
BGP routing table entry information of 10.10.10.10/32:
From: 1.1.1.21
Attr-set: origin egp, MED 16, pref-val 0,200<0:123>
RT <999:999>
Routes of vpn-instance vrf1:
BGP routing table entry information of 10.10.10.10/32:
From: 1.1.1.21
Routes of vpn-instance vrf2:
BGP routing table entry information of 10.10.10.10/32:
From: 1.1.1.21
| Item | Description |
|---|---|
| BGP routing table entry information of | The following information is about a specified BGP route. |
| From | IP address of the route originator. |
| Attr-set | Attr_Set attribute. |