The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display bier sub-domain 0
Total number of BIER sub-domains: 2
Sub-domain ID : 0
Advertisement info : isis (process ID: 1, level: L1)
Multi-topology : unicast(0)
Load balance number: 1
Address family : IPv4
BFR prefix : 1.1.1.11/32(LoopBack1)
BFR-ID : 1
BAR : 0
IPA : 0
Encapsulation type : MPLS
BSL : 256
MPLS label : 368640
Max-SI : 2
Encapsulation type : MPLS
BSL : 128
MPLS label : 368625
Max-SI : 2
<HUAWEI> display bier sub-domain
Total number of BIER sub-domains: 2
Sub-domain ID : 0
Advertisement info : isis (process ID: 1, level: L1)
Multi-topology : unicast(0)
Load balance number: 1
Address family : IPv4
BFR prefix : 1.1.1.11/32(LoopBack1)
BFR-ID : 1
BAR : 0
IPA : 0
Encapsulation type : MPLS
BSL : 256
MPLS label : 368640
Max-SI : 2
Item | Description |
---|---|
Total number of BIER sub-domains | Number of BIER subdomains. |
Sub-domain ID | ID of the BIER subdomain. |
Advertisement info | Type of the underlay protocol used for advertising BIER information and related information. |
Multi-topology | Multi-topology information, including the topology name and ID. |
Load balance number | Number of links for BIER tunnel load balancing. |
Address family | Address family. Only IPv4 is supported. |
BFR prefix | BFR-prefix. |
BFR-ID | BFR-ID. |
BAR | BIER algorithm. |
IPA | IGP algorithm. |
Encapsulation type | Encapsulation type of BIER packets. |
MPLS label | MPLS label. |
BSL | Bitstring length. |
Max-SI | Maximum set identifier. |