display dcn global

Function

The display dcn global command displays whether the global DCN is enabled.

display dcn global

None

All views

1: Monitoring level

Task Name	Operations
dcn	read

Usage Scenario

Run this command to check global information for DCN on the device.

In VS mode, this command is supported only by the admin VS.

The actual command output varies according to the device. The command output here is only an example.

# Display the global DCN configuration information in PTN mode.

<HUAWEI> display dcn global
DCN global information:
state: enable 
neid: 0x1800B4
vlan: 4094
data-priority: 3

# Display the global DCN configuration information.

<HUAWEI> display dcn global
DCN global information:
state: enable 
neid: 0x41113

**Table 1** Description of the **display dcn global** command output
Item	Description
DCN global information	Global DCN information.
state	Whether the DCN feature is enabled globally.
neid	NE ID.
vlan	DCN VLAN ID. You can run the dcn vlan command to configure a DCN VLAN.
data-priority	Priority configured for data packets. You can run the data-packet priority command to configure a priority for DCN packets.