display debugging rpki

Format

display debugging rpki

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
rpki	read

Usage Guidelines

Usage Scenario

When a large amount of information is output, you can run the display debugging rpki command to view information about enabled RPKI debugging functions and disable some unnecessary debugging functions to minimize the debugging information output.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about enabled RPKI debugging functions.

<HUAWEI> display debugging rpki
[RPKI] :Route-monitor-IP-vrf=0&peer=1.1.1.1 debugging switch is on

**Table 1** Description of the **display debugging rpki** command output
Item	Description
Route-monitor-IP-vrf=0&peer=1.1.1.1 debugging switch is on	Debugging is enabled for the RPKI session with 1.1.1.1 as the session address on the public network. Route-monitor-IP-vrf=0 indicates that the RPKI session belongs to the public network instance. If the value of Route-monitor-IP-vrf is not 0, the RPKI session belongs to a VPN instance.