display e-trunk brief

Function

The display e-trunk brief command displays E-Trunk brief information.

Format

display e-trunk brief

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
etrunk	read

Usage Guidelines

Usage Scenario

After an E-Trunk is configured, you can run the display e-trunk command to check its configurations.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display brief E-Trunk information.

<HUAWEI> display e-trunk brief
E-TRUNK-ID  State    VPN-Instance                   Peer-IP                        Source-IP                     
---------------------------------------------------------------------------------------------------------------
1           Master   vpn1                           1.1.1.1                        2.2.2.2                      
---------------------------------------------------------------------------------------------------------------
Total:1       Master:1     Backup:0         Init:0

**Table 1** Description of the **display e-trunk brief** command output
Item	Description
E-TRUNK-ID	E-Trunk ID, which can be configured or changed using the e-trunk command in the system view.
State	E-Trunk status: Init. Backup. Master.
VPN-Instance	Name of the VPN instance.
Master	Number of E-Trunks in the Master state.
Peer-IP/Source-IP	E-Trunk peer address/source address.
Total	Total number of E-Trunks.
Backup	Number of E-Trunks in the Backup state.
Init	Number of E-Trunks in the Init state.