display evpn recover-timer

Function

The display evpn recover-timer command displays information about the recovery timer on an interface.

Format

display evpn recover-timer [ interface { interface-type interface-number | interface-name } ]

Parameters

Parameter	Description	Value
interface	Displays information about an interface.	-
interface-type	Specifies an interface type.	-
interface-number	Specifies the number of an interface.	-
interface-name	Specifies the name of an interface.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
bgp	read

Usage Guidelines

Usage Scenario

To view the recovery timer information on an interface of the master main control board, run the display evpn recover-timer command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the recovery timer information on an interface of the master main control board.

<HUAWEI> display evpn recover-timer
IfName      :  Eth-Trunk1
Mode        :  RUNNING     
BeginTime   :  2019-08-11 11:31:20
EndTime     :  -----
TimerLeft(s):  27

**Table 1** Description of the **display evpn recover-timer** command output
Item	Description
IfName	Interface name.
Mode	Mode: IDLE: idle state. RUNNING: running state.
BeginTime	Date and time when the recovery timer started.
EndTime	Date and time when the recovery timer ended last time.
TimerLeft(s)	Remaining time of the recovery timer.