display evpn track-peer-timer

Function

The display evpn track-peer-timer command displays information about a timer for peer status tracking based on an ESI.

Format

display evpn track-peer-timer esi esi

Parameters

Parameter	Description	Value
esi esi	Displays an Ethernet segment identifier (ESI).	The value is in the format of xxxx.xxxx.xxxx.xxxx.xxxx, where x is a hexadecimal integer ranging from 0 to F. The value must start with 00 or 01 but cannot be all 0s.

Parameter

Description

Value

esi esi

Displays an Ethernet segment identifier (ESI).

The value is in the format of xxxx.xxxx.xxxx.xxxx.xxxx, where x is a hexadecimal integer ranging from 0 to F. The value must start with 00 or 01 but cannot be all 0s.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
bgp	read

Usage Guidelines

Usage Scenario

To view information about a timer for peer status tracking based on an ESI on the master main control board, run the display evpn track-peer-timer esi <ESI> command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about a timer for peer status tracking based on an ESI.

<HUAWEI> display evpn track-peer-timer esi 0099.8888.7777.6666.5555
Esi                         Type                      Mode        TimerLeft(s)      
0099.8888.7777.6666.5555    BRM_EVPN_TRACK_PEER_TIMER IDLE        -----

**Table 1** Description of the **display evpn track-peer-timer** command output
Item	Description
Esi	Ethernet segment identifier (ESI).
Type	Timer type: BRM_EVPN_TRACK_PEER_TIMER, timer for peer status tracking.
Mode	Mode: IDLE: idle state. RUNNING: running state.
TimerLeft(s)	Remaining time of the timer for peer status tracking, in seconds.