display ftp-client

Function

The display ftp-client command displays the current configuration of FTP client.

Format

display ftp-client

Parameters

None

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
ftp-client	read

Usage Guidelines

The configuration contains source IP address of IPv4 and IPv6 configuration, source interface of the device that functions as an FTP client.

After setting the source IP address of an FTP client, you can run the display ftp-client command to view the configuration. If ftp client-source is not specified, the source IP address of FTP client is 0.0.0.0 by default.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configuration of source IP address of FTP client.

<HUAWEI> display ftp-client
SrcIPv4Addr         : 10.18.26.233

# Display the configuration of source interface of FTP client.

<HUAWEI> display ftp-client
Interface Name      :LoopBack0

**Table 1** Description of the **display ftp-client** command output
Item	Description
SrcIPv4Addr	Indicates the source IPv4 address.
Interface Name	Indicates the source interface.