display ftp-server

Function

The display ftp-server command displays the current status of FTP server.

Format

display ftp-server

Parameters

None

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
ftp-server	read

Usage Guidelines

You can display the result after configuring the FTP server parameters.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the current state of the FTP server.

<HUAWEI> display ftp-server
Server state             : disabled
IPv6 server state        : disabled
Timeout value (mins)     : 30
IPv6 Timeout value (mins): 30
Listen port              : 21
IPv6 listen port         : 21
ACL name                 :
IPv6 ACL name            : 
ACL number               :
IPv6 ACL number          : 
Current user count       : 0
Max user number          : 15

**Table 1** Description of the **display ftp-server** command output
Item	Description
Server state	State of FTP server. It can be any of the following values: enabled. disabled. By default, the FTP server state is disabled.
IPv6 server state	State of FTP IPv6 server. It can be any of the following values: enabled. disabled. By default, the FTP IPv6 server state is disabled.
IPv6 Timeout value (mins)	IPv6 Timeout value.
IPv6 listen port	FTP IPv6 server listening port. By default, the server listening port value is 21.
IPv6 ACL name	IPv6 access control list names.
IPv6 ACL number	IPv6 access control list number.
Timeout value (mins)	Timeout value.
Listen port	FTP server listening port. By default, the server listening port value is 21.
ACL name	IPv4 access control list names.
ACL number	IPv4 access control list number.
Current user count	Number of users currently connected to FTP server.
Max user number	Maximum number of users. By default, the maximum number of users is 15.