display ip routing-table label-stack

Function

The display ip routing-table label-stack command displays information about the label allocated to the LSP to which a BGP public-network IPv4 route recurses in a BGP free scenario.

Format

display ip routing-table label-stack ipv4-address mask-length

Parameters

Parameter	Description	Value
ipv4-address	Specifies a destination IP address.	The value is in dotted decimal notation.
mask-length	Specifies a mask length.	The value is an integer ranging from 0 to 32.

Parameter

Description

Value

ipv4-address

Specifies a destination IP address.

The value is in dotted decimal notation.

mask-length

Specifies a mask length.

The value is an integer ranging from 0 to 32.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
bgp	read

Usage Guidelines

Usage Scenario

To check information about the label allocated to the LSP to which a BGP public-network IPv4 route recurses in a BGP free scenario, run the display ip routing-table label-stack command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about the label allocated to the LSP to which a BGP public-network IPv4 route recurses.

<HUAWEI> display ip routing-table label-stack 1.1.1.1 24
LabelLevel   : 1
TunnelType   : ldpLsp
OutLabel     : 32770
OutInterface : GE0/1/18

**Table 1** Description of the **display ip routing-table label-stack** command output
Item	Description
LabelLevel	Number of labels.
TunnelType	Type of LSP to which a BGP public-network IPv4 route recurses. The following types are supported: ldpLsp. teLsp. bgpLsp.
OutLabel	Label allocated to the LSP.
OutInterface	Outbound interface obtained during the recursion.