display mpls l2vpn monitor-group

Function

The display mpls l2vpn monitor-group command displays information about an L2VPN monitoring group.

Format

display mpls l2vpn monitor-group group-name

display mpls l2vpn monitor-group

Parameters

Parameter	Description	Value
group-name	Specifies the name of an L2VPN monitoring group whose information is to be displayed.	The value is a string of 1 to 31 case-sensitive characters without spaces.

Parameter

Description

Value

group-name

Specifies the name of an L2VPN monitoring group whose information is to be displayed.

The value is a string of 1 to 31 case-sensitive characters without spaces.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
l2vpn	read

Usage Guidelines

Usage Scenario

To check information about a configured L2VPN monitoring group and its attributes, run the display mpls l2vpn monitor-group command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about a specified L2VPN monitoring group on a PE.

<HUAWEI> display mpls l2vpn monitor-group group1
monitor-group group1
   Trigger-active delay : 2 (s)
   Max active delay  : 120 (s)
   Status   : Enabled

-------------------------------------------------------
 monitor-group binding pw number : 1
-------------------------------------------------------
    VSI name     : vsi1
    PW Signaling : ldp
    Peer Ip      : 1.1.1.1
    VC ID        : 10
    VC Type      : vlan
    State        : down

-------------------------------------------------------
monitor-group track pw number : 2
-------------------------------------------------------
VSI name PW Signaling Peer Ip VC ID VC Type State Block status
1                 ldp 2.2.2.2     9    vlan    up        block
2                 ldp 2.2.2.2     8    vlan    up        block

# Display information about all L2VPN monitoring groups on a PE.

<HUAWEI> display mpls l2vpn monitor-group
Monitor-group number : 1
---------------------------------------------------------------
monitor-group                 delay-time max-delay-time status
---------------------------------------------------------------
group1                                 2              0 disable

**Table 1** Description of the **display mpls l2vpn monitor-group** command output
Item	Description
monitor-group	Name of an L2VPN monitoring group.
monitor-group binding pw number	Number of protocol VSI PWs bound to the L2VPN monitoring group.
monitor-group track pw number	Number of service VSI PWs tracking the L2VPN monitoring group.
Trigger-active delay	Hold-off time for unblocking service VSI PWs after the protocol VSI PWs bound to the L2VPN monitoring group go Up.
Max active delay	Maximum hold-off time for unblocking service VSI PWs.
VSI name	Name of the VSI.
PW Signaling	PW signaling type in the VSI. ldp. bgp.
Peer Ip	Peer IP address of the VSI.
VC ID	ID of the VC.
VC Type	VC encapsulation type: vlan. ethernet.
State	PW status.
Block status	PW blocking status.
status	Whether the monitoring capability of an L2VPN monitoring group is enabled.
Monitor-group number	Number of L2VPN monitoring groups.
delay-time	Hold-off time for unblocking service VSI PWs after the protocol VSI PWs bound to an L2VPN monitoring group go Up.
max-delay-time	Maximum hold-off time for unblocking service VSI PWs.