display default-parameter mrm

Function

The display default-parameter mrm command displays default multicast routing management (MRM) configurations.

Format

display default-parameter mrm

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
mcast-base	read

Usage Guidelines

Usage Scenario

The display default-parameter mrm command displays default MRM configurations, irrespective of whether MRM configurations have been changed.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display default MRM configurations.

<HUAWEI> display default-parameter mrm
  System View Default Configurations:
  -----------------------------------
  Load splitting rule: disabled
  Route selection rule: preference-preferred
  Multi-topology: disabled

  Interface View Default Configurations:
  --------------------------------------
  Minimum TTL: 1

**Table 1** Description of the **display default-parameter mrm** command output
Item	Description
System View Default Configurations	Default MRM configurations in the system view.
Load splitting rule	Whether multicast load splitting is configured.
Route selection rule	Reverse path forwarding (RPF) route selection rule. By default, RPF route selection is based on preferences of routing protocols.
Interface View Default Configurations	Default MRM configurations in the interface view.
Minimum TTL	Minimum TTL value for multicast packet forwarding.
Multi-topology	Whether multi-topology is configured.