display ospf srlg

Function

The display ospf srlg command displays shared risk link group (SRLG) information.

Format

display ospf [ process-id ] srlg { srlgGroupId | all }

Parameters

Parameter	Description	Value
process-id	Specifies an OSPF process ID.	The value is an integer ranging from 1 to 4294967295.
srlgGroupId	Specifies an SRLG ID.	The value is an integer ranging from 0 to 4294967295.
all	Indicates all SRLGs.	-

Parameter

Description

Value

process-id

Specifies an OSPF process ID.

The value is an integer ranging from 1 to 4294967295.

srlgGroupId

Specifies an SRLG ID.

The value is an integer ranging from 0 to 4294967295.

all

Indicates all SRLGs.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ospf	read

Usage Guidelines

Usage Scenario

After interfaces are added to SRLGs, you can run the display ospf srlg command to check the SRLG information. If neither OSPF process ID nor SRLG number is specified, the command displays the information about all SRLGs.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display SRLG information.

<HUAWEI> display ospf srlg all
Total SRLG supported : 4000
Total SRLG configured : 3

                           SRLG for OSPF(1)
                   --------------------------------
 SRLG          10:      10GE0/1/1          10GE0/1/2         10GE0/1/3

**Table 1** Description of the **display ospf srlg** command output
Item	Description
Total SRLG supported	Maximum number of supported SRLGs.
Total SRLG configured	Number of configured SRLGs.
SRLG 10	Interfaces in the SRLG.