display ospf traffic-adjustment

Function

The display ospf traffic-adjustment command displays OSPF process-specific tunnel information relevant to traffic adjustment (using IGP shortcut or forwarding adjacency).

Format

display ospf [ process-id ] traffic-adjustment

Parameters

Parameter	Description	Value
process-id	Specifies the OSPF process ID.	The value is an integer ranging from 1 to 4294967295. If no process ID is specified, information about all OSPF processes is displayed.

Parameter

Description

Value

process-id

Specifies the OSPF process ID.

The value is an integer ranging from 1 to 4294967295. If no process ID is specified, information about all OSPF processes is displayed.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ospf	read

Usage Guidelines

Usage Scenario

When too many information is displayed, you can select begin, exclude, or include to specify the matching condition to filter the display information.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display tunnel information relevant to traffic adjustment in OSPF process 100.

<HUAWEI> display ospf 100 traffic-adjustment
OSPF Process 100 with Router ID 10.1.1.2
                  Traffic adjustment
Interface: 2.2.2.2 (Tun1)
 Type: Forwarding Adjacency
 Neighbor ID: 10.1.2.2   Cost: 1
 Configuration:
  Neighbor ip address: 4.4.4.4
  Cost     : 1
  Cost Type: Absolute
  Hold Time: 0

**Table 1** Description of the **display ospf traffic-adjustment** command output
Item	Description
Neighbor ID	Neighbor router ID.
Neighbor ip address	Neighbor IP address.
Cost	Cost value.
Cost Type	Cost type: Absolute. Relative.
Hold Time	Hold time for a tunnel.
Interface	Name and IP address of a tunnel interface.
Type	Whether a tunnel is applied to IGP shortcut or forwarding adjacency or not.
Configuration	Configuration Information.