display ospf troubleshooting

Function

The display ospf troubleshooting command displays information about OSPF neighbor disconnections.

Format

display ospf troubleshooting

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ospf	read

Usage Guidelines

Usage Scenario

To check information about OSPF neighbor disconnections, run the display ospf troubleshooting command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display diagnostic information about OSPF neighbor disconnections.

<HUAWEI> display ospf troubleshooting
Total counts: 2
--------------------------------------------------------------------------------
Sequence   Time                      Event Description                          
--------------------------------------------------------------------------------
 1         2015-11-25 09:28:18       The OSPF 1 peer 1.1.1.1 went Down because o
                                     f mismatched Hello timers. Please check the
                                      OSPF Hello timer configuration.(Interface 
                                     = Ethernet0/1/16, PingResult = 5 packets suc
                                     cess, 0 packets timeout)
 2         2015-11-25 09:27:42       The OSPF 1 peer 1.1.1.1 went Down because 1
                                     -way Hello packets were received. Please ch
                                     eck the status of neighbor interface.(Inter
                                     face = Ethernet0/1/16)
--------------------------------------------------------------------------------

**Table 1** Description of the **display ospf troubleshooting** command output
Item	Description
Total counts	The count of OSPF neighbor disconnections.
Sequence	Sequence number.
Time	Time when the OSPF neighbor disconnection occurred.
Event Description	Description of the OSPF neighbor disconnection event.