display ospfv3 troubleshooting

Function

The display ospfv3 troubleshooting command displays information about OSPFv3 neighbor disconnections.

Format

display ospfv3 troubleshooting

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
ospf	read

Usage Guidelines

Usage Scenario

To check information about OSPFv3 neighbor disconnections, run the display ospfv3 troubleshooting command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about OSPFv3 neighbor disconnections.

<HUAWEI> display ospfv3 troubleshooting
Total counts: 1
--------------------------------------------------------------------------------
Sequence   Time                      Event Description                          
--------------------------------------------------------------------------------
 1         2015-11-25 09:29:02       The OSPFv3 1 peer 10.10.10.10 went Down bec
                                     ause the OSPFv3 area 0.0.0.1 was reset. Ple
                                     ase check the area configuration.(Interface
                                      = GigabitEthernet0/1/17)                          
--------------------------------------------------------------------------------

**Table 1** Description of the **display ospfv3 troubleshooting** command output
Item	Description
Total counts	The count of OSPFv3 neighbor disconnections.
Sequence	Sequence number.
Time	Time when the OSPFv3 neighbor disconnection occurred.
Event Description	Description of the OSPFv3 neighbor disconnection event.