display default-parameter(PIM)
Function
The display default-parameter pim-dm command displays default configurations about PIM-DM PIM-SM PIM-SSM.
Usage Guidelines
Usage Scenario
The display default-parameter pim-dm command displays default PIM-DM configurations, irrespective of whether PIM-DM configurations have been changed.
The display default-parameter pim-sm command displays default PIM-SM configurations, irrespective of whether PIM-SM configurations have been changed. The display default-parameter pim-ssm command displays default PIM-SSM configurations, regardless of whether PIM-SSM configurations have been changed.Example
The actual command output varies according to the device. The command output here is only an example.
<HUAWEI> display default-parameter pim-ssm
Pim View Default Configurations:
---------------------------------
Hello-option dr-priority: 1
Hello-option holdtime: 105 s
Hello-option lan-delay: 500 ms
Hello-option neighbor-tracking: disabled
Hello-option override-interval: 2500 ms
Holdtime assert: 180 s
Holdtime join-prune: 210 s
Probe-interval: 5 s
Register-packet-checksum: disabled
Register-policy: disabled
Register-suppression-timeout: 60 s
Source-lifetime: 210 s
Source-policy: disabled
Ssm-policy: disabled
Hello periodic interval: 30 s
Join-prune periodic interval: 60 s
Interface View Default Configurations:
--------------------------------------
Pim bfd: disabled
Pim hello-option dr-priority: 1
Pim hello-option holdtime: 105 s
Pim hello-option lan-delay: 500 ms
Pim hello-option neighbor-tracking: disabled
Pim hello-option override-interval: 2500 ms
Pim holdtime assert: 180 s
Pim holdtime join-prune: 210 s
Pim require-genid: disabled
Pim silent: disabled
Pim timer dr-switch-delay: disabled
Pim hello periodic interval: 30 s
Pim join-prune periodic interval: 60 s
Pim triggered-hello-delay: 5 s
Pim version: 2
Pim ipsec sa: disabled
Pim join-policy: disabled
Pim neighbor-policy: disabled
<HUAWEI> display default-parameter pim-sm
Pim View Default Configurations:
---------------------------------
Auto-rp listening enable: disabled
Bsr-policy: disabled
C-bsr admin-scope: disabled
C-bsr global: disabled
C-bsr group: none
C-bsr hash-length: 30 s
C-bsr holdtime: 130 s
C-bsr interval: 60 s
C-bsr priority: 0
C-rp advertisement-interval: 60 s
C-rp holdtime: 150 s
C-rp priority: 0
Crp-policy: disabled
Bsm semantic fragmentation: disabled
Hello-option dr-priority: 1
Hello-option holdtime: 105 s
Hello-option lan-delay: 500 ms
Hello-option neighbor-tracking: disabled
Hello-option override-interval: 2500 ms
Holdtime assert: 180 s
Holdtime join-prune: 210 s
Probe-interval: 5 s
Register-header-checksum: disabled
Register-policy: disabled
Register-suppression-timeout: 60 s
Source-lifetime: 210 s
Source-policy: disabled
Spt-switch-threshold: disabled
Ssm-policy: disabled
Static-rp: disabled
Hello periodic interval: 30 s
Join-prune periodic interval: 60 s
Timer spt-switch: 15 s
Interface View Default Configurations:
--------------------------------------
Pim bfd: disabled
Pim bsr-boundary: disabled
Pim hello-option dr-priority: 1
Pim hello-option holdtime: 105 s
Pim hello-option lan-delay: 500 ms
Pim hello-option neighbor-tracking: disabled
Pim hello-option override-interval: 2500 ms
Pim holdtime assert: 180 s
Pim holdtime join-prune: 210 s
Pim require-genid: disabled
Pim silent: disabled
Pim timer dr-switch-delay: disabled
Pim hello periodic interval: 30 s
Pim join-prune periodic interval: 60 s
Pim triggered-hello-delay: 5 s
Pim version: 2
Pim ipsec sa: disabled
Pim join-policy: disabled
Pim neighbor-policy: disabled
<HUAWEI> display default-parameter pim-dm
PIM View Default Configurations:
---------------------------------
Hello-option dr-priority: 1
Hello-option holdtime: 105 s
Hello-option lan-delay: 500 ms
Hello-option neighbor-tracking: disabled
Hello-option override-interval: 2500 ms
Holdtime assert: 180 s
Holdtime join-prune: 210 s
Source-lifetime: 210 s
State-refresh-interval: 60 s
State-refresh-rate-limit: 30 s
State-refresh-ttl: 255
Hello periodic interval: 30 s
Join-prune periodic interval: 60 s
Interface View Default Configurations:
--------------------------------------
Pim bfd: disabled
Pim hello-option dr-priority: 1
Pim hello-option holdtime: 105 s
Pim hello-option lan-delay: 500 ms
Pim hello-option neighbor-tracking: disabled
Pim hello-option override-interval: 2500 ms
Pim holdtime assert: 180 s
Pim holdtime join-prune: 210 s
Pim require-genid: disabled
Pim silent: disabled
Pim state-refresh-capable: enabled
Pim timer dr-switch-delay: disabled
Pim timer graft-retry: 3 s
Pim hello periodic interval: 30 s
Pim join-prune periodic interval: 60 s
Pim triggered-hello-delay: 5 s
Pim version: 2
Pim ipsec sa: disabled
Pim neighbor-policy: disabled
| Item | Description |
|---|---|
| Pim View Default Configurations | Default configurations in the PIM view. |
| Pim bfd | Indicates whether PIM BFD is enabled on the interface. |
| Pim hello-option dr-priority | Indicates the priority for DR election on the interface. |
| Pim hello-option holdtime | Indicates the time period for the neighbor on the interface to hold the reachable state, in seconds. |
| Pim hello-option lan-delay | Indicates the delay in transmitting Prune messages at a shared network segment on the interface, in milliseconds. |
| Pim hello-option neighbor-tracking | Indicates whether neighbor tracking is enabled on the interface. |
| Pim hello-option override-interval | Indicates the interval for the interface to send Prune Override messages, in milliseconds. |
| Pim holdtime assert | Indicates the time period for the interface to hold the Assert state, in seconds. |
| Pim holdtime join-prune | Indicates the time period for the interface to hold the Join or Prune state, in seconds. |
| Pim require-genid | Indicates whether the received Hello message is required to carry the Generation ID. |
| Pim silent | Indicates whether PIM Silent is enabled on the interface. |
| Pim timer dr-switch-delay | Indicates whether the DR switch delay is set on the interface. |
| Pim hello periodic interval | Indicates the interval for the interface to send Hello messages, in seconds. |
| Pim join-prune periodic interval | Indicates the interval for the interface to send Join/Prune messages, in seconds. |
| Pim triggered-hello-delay | Indicates the maximum delay for the interface to send Hello messages, in seconds. |
| Pim version | Indicates the version of PIM enabled on the interface. |
| Pim ipsec sa | Whether the IPsec SA is configured on the interface. |
| Pim join-policy | Indicates whether the join-policy is configured on the interface. |
| Pim neighbor-policy | Indicates whether the neighbor-policy is configured on the interface. |
| Pim bsr-boundary | Whether a PIM boundary is configured on the interface. |
| Pim state-refresh-capable | Whether PIM state refreshing is enabled. |
| Pim timer graft-retry | Interval of Graft messages are retransmitted. |
| Hello-option dr-priority | Indicates the priority for Designated router (DR) election. |
| Hello-option holdtime | Indicates the time period for the neighbor to hold the reachable state, in seconds. |
| Hello-option lan-delay | Indicates the delay in transmitting Prune messages at a shared network segment, in milliseconds. |
| Hello-option neighbor-tracking | Indicates whether neighbor tracking is enabled. |
| Hello-option override-interval | Indicates the interval for sending Prune Override messages, in milliseconds. |
| Holdtime assert | Indicates the time period for holding the Assert state, in seconds. |
| Holdtime join-prune | Indicates the time period for holding the Join or Prune state, in seconds. |
| Hello periodic interval | Indicates the interval for sending Hello messages, in seconds. |
| Join-prune periodic interval | Indicates the interval for sending Join/Prune messages, in seconds. |
| Interface View Default Configurations | Indicates the default configurations in the interface view. |
| Auto-rp listening enable | Whether auto-rendezvous point (auto-RP) listening is enabled. |
| C-bsr admin-scope | Whether the BSR administrative domain function is enabled. |
| C-bsr global | Whether a candidate-bootstrap router (C-BSR) is configured in the global domain. |
| C-bsr group | Whether a C-BSR is configured in the BSR administrative domain. |
| C-bsr hash-length | Indicates the global hash mask length of the C-BSR. |
| C-bsr holdtime | Waiting time for the C-BSR to receive a Bootstrap message. |
| C-bsr interval | Interval for the BSR to send bootstrap messages. |
| C-bsr priority | Global priority of a C-BSR. |
| C-rp advertisement-interval | Interval for a candidate-rendezvous point (C-RP) to send Advertisement messages. |
| C-rp holdtime | Waiting time for the BSR to receive an Advertisement message. |
| C-rp priority | Global priority of a C-RP. |
| Bsm semantic fragmentation | Whether BSR message fragmentation is enabled. |
| Timer spt-switch | Whether the interval for checking whether the multicast packet rate exceeds the threshold before the switchover from an RPT to an SPT is configured, in second. |
| Probe-interval | Indicates the interval for sending Probe messages (empty Register messages) to the RP, in seconds. |
| Register-header-checksum | Indicates whether calculating the checksum based on information in Register message header is required. |
| Register-policy | Indicates whether the rule for filtering Register messages is configured. |
| Register-suppression-timeout | Indicates the time period for holding the register-suppression state, in seconds. |
| Source-lifetime | Indicates the timeout period of an (S, G) entry, in seconds. |
| Source-policy | Indicates whether the rule for filtering multicast sources is configured. |
| Ssm-policy | Indicates whether the SSM group address range is set. |
| Bsr-policy | Whether a valid bootstrap router address range is set. |
| Crp-policy | Indicates whether the legal address range of the C-RP and the range of multicast groups that the C-RP serves are set. |
| Spt-switch-threshold | Whether the threshold of the multicast packet rate that triggers the switch from a rendezvous point tree (RPT) to a shortest path tree (SPT) is configured. |
| Static-rp | Whether a static RP is configured. |
| State-refresh-interval | Interval to send State-Refresh messages. |
| State-refresh-rate-limit | Time that a device has to wait before receiving the next State-Refresh message. |
| State-refresh-ttl | TTL of State-Refresh messages to be sent. |