display pim invalid-packet verbose

Function

The display pim invalid-packet verbose command displays statistics about received invalid PIM messages and details of these messages.

Format

display pim invalid-packet [ packet-number ] verbose

Parameters

Parameter	Description	Value
packet-number	Displays details about a specified number of latest received invalid PIM messages.	The value is an integer ranging from 1 to 100. By default, the command displays details about all received invalid PIM messages.

Parameter

Description

Value

packet-number

Displays details about a specified number of latest received invalid PIM messages.

The value is an integer ranging from 1 to 100. By default, the command displays details about all received invalid PIM messages.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
pim	read

Usage Guidelines

Usage Scenario

If packet-number and verbose are specified, the command displays details about the specified number of latest received invalid PIM messages.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display details of the last received invalid PIM message in the public network instance.

<HUAWEI> display pim invalid-packet 1 verbose
       Detailed information of invalid packets
-----------------------------------------------------
Packet information (Index 1):
-----------------------------------------------------
Interface           :  GigabitEthernet0/1/1
Time                :  2010-6-1 20:04:35 UTC-08:00
Message Length      :  26
Invalid Type        :  Invalid Multicast Source
Source Address      :  10.0.3.3
0000: 25 00 96 77 01 00 00 20 e1 01 01 01 01 00 e0 00
0010: 00 00 80 00 00 64 00 00 00 00
-----------------------------------------------------

**Table 1** Description of the **display pim invalid-packet verbose** command output
Item	Description
Detailed information of invalid packets	Details about the invalid PIM message.
Packet information (Index 1)	Sequence number of the invalid PIM message. Invalid PIM messages are numbered in the reverse order of the time that messages are received. That is, the last received message has the largest sequence number.
Interface	Interface that receives the invalid PIM message.
Time	Time when the invalid SPT switch message was received, in any of the following formats: YYYY-MM-DD HH:MM:SS. YYYY-MM-DD HH:MM:SS UTC±HH:MM DST. YYYY-MM-DD HH:MM:SS UTC±HH:MM. YYYY-MM-DD HH:MM:SS DST. UTC±HH:MM indicates that a time zone is configured using the clock timezone command. DST indicates that the daylight saving time is configured using the clock daylight-saving-time command.
Message Length	Length of the invalid PIM message.
Invalid Type	Type of the invalid PIM message.
Source Address	Source address of the invalid PIM message.
0000	Contents in the invalid PIM message.