display segment-routing adjacency mpls forwarding

Function

The display segment-routing adjacency mpls forwarding command displays the segment routing adjacency label forwarding table.

Format

display segment-routing adjacency mpls forwarding

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
segr	read

Usage Guidelines

Usage Scenario

To check the segment routing adjacency label forwarding table, run the display segment-routing adjacency mpls forwarding command. There is a one-to-one mapping between this table and the one delivered to the FES.

No entry will be displayed in the segment routing label forwarding table after the undo segment-routing command is run.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the segment routing adjacency label forwarding table.

<HUAWEI> display segment-routing adjacency mpls forwarding
          Segment Routing Adjacency MPLS Forwarding Information 

Label      Interface     NextHop       Type       MPLSMtu   Mtu 
---------------------------------------------------------------------------- 
22145      GE0/1/0       192.168.1.2   ISIS-V4    1400      1500
45000      GE0/1/1       192.168.2.2   STATIC-V4  1400      1500

Total information(s): 2

**Table 1** Description of the **display segment-routing adjacency mpls forwarding** command output
Item	Description
Label	Label value, that is, the SID specified in the ipv4 adjacency command.
Interface	Local interface specified in the ipv4 adjacency command.
NextHop	IP address of the remote interface specified in the ipv4 adjacency command.
Type	Link type: ISIS-V4. STATIC-V4. OSPFv2. BGPLS.
MPLSMtu	Maximum transmission unit of MPLS.
Mtu	Maximum transmission unit.
Total information(s)	Total number of label forwarding entries.