display segment-routing ipv6 locator

Format

display segment-routing ipv6 locator [ locator-name ] verbose

Parameters

Parameter	Description	Value
locator-name	Specifies the name of a SID node route locator.	The value is a string of 1 to 31 case-sensitive characters. When double quotation marks are used around the string, spaces are allowed in the string.
verbose	Displays detailed information.	-

Parameter

Description

Value

locator-name

Specifies the name of a SID node route locator.

The value is a string of 1 to 31 case-sensitive characters. When double quotation marks are used around the string, spaces are allowed in the string.

verbose

Displays detailed information.

-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
segr	read

Usage Guidelines

Usage Scenario

After a locator is configured in SRv6, a static SID can be assigned to the locator, and an IGP or BGP can advertise the SID of the locator. After the static SID locator length is set for the locator, dynamic SIDs out of the specified static SID range can be applied for, which prevents SID conflicts.

To view SRv6 locator information, run the display segment-routing ipv6 locator command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display SRv6 locator information.

<HUAWEI> display segment-routing ipv6 locator verbose

                        Locator Configuration Table
                        ---------------------------

LocatorName   : loc1                                      LocatorID     : 4
IPv6Prefix    : 2001:DB8::                                PrefixLength  : 64
Block         : 2001:DB8::                                BlockLength   : 48
NodeID        : 0                                         NodeIdLength  : 16
ComprStaticLen: 10                                        StaticLength  : 20
ArgsLength    : 0                                         Reference     : 0
Algorithm     : 0
AutoCSIDPoolID: 8200                                      ComprDynLength: 6
AutoCSIDBegin : 2001:DB8:0:0:400::
AutoCSIDEnd   : 2001:DB8:0:0:FFFF::
StaticCSIDBegin: 2001:DB8:0:0:1::
StaticCSIDEnd : 2001:DB8:0:0:3FF::
AutoSIDPoolID : 8199                                      DynLength     : 28
AutoSIDBegin  : 2001:DB8::10:0
AutoSIDEnd    : 2001:DB8::FFFF:FFFF:FFFF
StaticSIDBegin: 2001:DB8::1
StaticSIDEnd  : 2001:DB8::F:FFFF

Total Locator(s): 1

**Table 1** Description of the **display segment-routing ipv6 locator** command output
Item	Description
LocatorName	Locator name.
LocatorID	Automatically allocated locator ID.
IPv6Prefix	Prefix of a locator.
PrefixLength	Locator prefix length.
Block	Configured block.
BlockLength	Length of the configured block.
NodeIdLength	Length of the configured NodeId segment.
StaticLength	Length of the static locator segment.
ArgsLength	Length of a parameter segment.
Reference	Whether a locator is referenced.
Algorithm	Locator algorithm.
AutoCSIDBegin	Start value of dynamic compressed SID.
AutoCSIDEnd	End value of the dynamic compressed SID.
StaticCSIDEnd	End value of the static compressed SID.
AutoSIDPoolID	ID of a dynamic SID pool.
DynLength	Dynamic segment length.
AutoSIDBegin	Start value of the dynamic SID.
AutoSIDEnd	End value of the dynamic SID.
StaticSIDEnd	End value of the static SID.
NodeId	Configured NodeId segment.
AutoCSIDPoolID	ID of the dynamic compression SID pool.
ComprStaticLen	Length of the configured static compression segment.
ComprDynLength	Length of the compression dynamic segment.
StaticCSIDBegin	Start value of the static compressed SID.
StaticSIDBegin	Start value of the static SID.