display srv6-te policy status

Function

The display srv6-te policy status command displays the reason why the SRv6 TE policy cannot be Up.

Format

display srv6-te policy status { endpoint endpoint-ip color color-value | policy-name name-value | binding-sid binding-sid }

Parameters

Parameter	Description	Value
endpoint endpoint-ip	Specifies the endpoint of an SRv6 TE Policy.	The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.
color color-value	Specifies the color value of an SRv6 TE Policy.	The value is an integer that ranges from 0 to 4294967295.
policy-name name-value	Specifies the name of an SRv6 TE Policy.	The value is a string of 1 to 31 case-sensitive characters. When double quotation marks are used around the string, spaces are allowed in the string.
binding-sid binding-sid	Specifies a binding SID.	The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
srpolicy	read

Usage Guidelines

Usage Scenario

To check SRv6 TE Policy status for determining the reason why an SRv6 TE Policy cannot go up, run the display srv6-te policy status command. The command output facilitates troubleshooting.

Example

The actual command output varies according to the device. The command output here is only an example.

# According to the policy name, check whether the SRv6 TE policy is up and why the SRv6 TE policy cannot be up.

<HUAWEI> display srv6-te policy status policy-name aaaa
Policy State                             : Up
  Check Admin Status                     : Pass
  Check Endpoint & Color                 : Pass
  Check Policy Not Reach Limit           : Pass
  Check Segment List Exist               : Pass
  Check Segment List Valid               : Pass
  Check Segment List Not Reach Limit     : Pass
  Check Candidate Path Valid             : Pass

**Table 1** Description of the **display srv6-te policy status** command output
Item	Description
Policy State	SRv6 TE Policy status: Up. Down (Init). Down (Overrun). Down (BFD down). Down (Shutdown). Down (Delay Delete).
Check Admin Status	Whether the shutdown command is run for an SRv6 TE Policy: Fail: The shutdown command is run. Pass: The shutdown command is not run.
Check Endpoint & Color	Whether endpoint and color attributes are configured for an SRv6 TE Policy: Fail: The endpoint and color attributes are not configured. Pass: The endpoint and color attributes are configured. If the result of the previous check item is Fail, one hyphen (-) is displayed.
Check Policy Not Reach Limit	Whether the failure for an SRv6 TE Policy to go up occurs because the number of existing SRv6 TE Policies exceeds the upper threshold: Fail: The failure is caused by threshold-crossing. Pass: The failure is not caused by threshold-crossing. If the result of any previous check item is Fail, one hyphen (-) is displayed.
Check Segment List Exist	Whether the candidate path of an SRv6 TE Policy has a valid segment list: Fail: No valid segment list exists. Pass: A valid segment list exists. If the result of any previous check item is Fail, one hyphen (-) is displayed.
Check Segment List Valid	Whether up segment lists exist in an SRv6 TE Policy: Fail: No up segment list exists. Pass: Up segment lists exist. If the result of the previous check item is Fail, one hyphen (-) is displayed.
Check Segment List Not Reach Limit	Whether the failure for an SRv6 TE Policy to go Active occurs because the number of existing segment lists exceeds the upper threshold: Fail: The failure is caused by threshold-crossing. Pass: The failure is not caused by threshold-crossing. If the result of the previous check item is Fail, one hyphen (-) is displayed.
Check Candidate Path Valid	Whether up candidate paths exist in an SRv6 TE Policy: Fail: No up candidate path exists. Pass: Up candidate paths exist. If the result of the previous check item is Fail, one hyphen (-) is displayed.