display tftp-client

Function

The display tftp-client command displays the current configuration of the TFTP client.

Format

display tftp-client

Parameters

None

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
tftp-client	read

Usage Guidelines

Usage Scenario

You can set the source IP address by using tftp client source command. You can also configure the ACL by using tftp server acl command. After setting the source IP address and configuring the ACL of a TFTP client, you can run this command to view the configuration. By default, the source IP address of a TFTP client is set to 0.0.0.0.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the current configuration of the TFTP client.

<HUAWEI> display tftp-client
--------------------------------------------------------------------------------
ACL name             :
ACL number           :
IPv6 ACL name        :
IPv6 ACL number      :
Source IPv4 address  :  0.0.0.0
--------------------------------------------------------------------------------

**Table 1** Description of the **display tftp-client** command output
Item	Description
ACL name	Indicates the ACL name for IPv4 configuration.
ACL number	Indicates the ACL number for IPv4 configuration.
IPv6 ACL name	Indicates the ACL name for IPv6 configuration.
IPv6 ACL number	Indicates the ACL number for IPv6 configuration.
Source IPv4 address	Indicates the source IPv4 address.