display time-range

Function

The display time-range command displays a specified or all time ranges.

Format

display time-range time-name

Parameters

Parameter	Description	Value
time-name	Specifies the name of a time range.	The value is a string of 1 to 32 case-sensitive characters. It cannot contain spaces. The value must start with a letter. The name of a user-defined time range cannot be set to all. The display time-range all command displays information about all user-defined time ranges configured in the system.

Parameter

Description

Value

time-name

Specifies the name of a time range.

The value is a string of 1 to 32 case-sensitive characters. It cannot contain spaces. The value must start with a letter.

The name of a user-defined time range cannot be set to all.
The display time-range all command displays information about all user-defined time ranges configured in the system.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
acl	read

Usage Guidelines

To check detailed information about a time range, check whether a time range takes effect, or filter packets based on time ranges, run the display time-range command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about all time ranges.

<HUAWEI> display time-range all
Current time is 2020-06-23 09:12:30 Tuesday

Time-range : time1 ( Inactive )
 10:00 to 12:00 daily

**Table 1** Description of the **display time-range** command output
Item	Description
Current time	Current time of the system.
Time-range	Time range name.
Inactive	The time range is inactive at the current time. The status of a time range can be inactive or active.