display vsi pw out-interface

Format

display vsi pw out-interface [ vsi vsi-name ]

Parameters

Parameter	Description	Value
vsi vsi-name	Specifies the name of a VSI.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

vsi vsi-name

Specifies the name of a VSI.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
l2vpn	read

Usage Guidelines

Usage Scenario

The output of the display vsi [ name vsi-name ] [ verbose ] command contains only the tunnel policies of the VSI PW but not information about the actual outbound interface of the PW. To view information about the actual outbound interface of the PW, run the display vsi pw out-interface command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about the outbound interface of a VSI PW.

<HUAWEI> display vsi pw out-interface
Total: 1
--------------------------------------------------------------------------------
Vsi Name                        peer            vcid       interface
--------------------------------------------------------------------------------
a2                              3.3.3.9         2          GigabitEthernet0/1/0

**Table 1** Description of the **display vsi pw out-interface** command output
Item	Description
Vsi Name	Name of a VSI.
peer	VSI peer.
vcid	VC ID.
interface	Outbound interface of a VSI PW.