display xpl ext-community-list soo

Function

The display xpl ext-community-list soo command displays the configuration and reference information about XPL extended community (SoO) sets.

Format

display xpl ext-community-list soo state [ attached | unattached ]

display xpl ext-community-list soo [ name xpl-name attachpoints ]

Parameters

Parameter	Description	Value
attached	Displays information about the SoO sets that are referenced.	-
unattached	Displays information about the SoO sets that are not referenced.	-
name xpl-name	Specifies the name of the SoO sets.	The value is a string of 1 to 200 case-sensitive characters, spaces not supported. The string can contain letters, digits, underscores (_), hyphens (-), and dots (.). It must start with a letter or digit.
attachpoints	Displays information about points of attachment.	-
state	Displays information about SoO set configurations and references.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
route-base	read

Usage Guidelines

Usage Scenario

To view information about XPL route-filter and route attribute set configurations and references, run the display xpl command. If a large amount of information is output, you can specify attached or unattached to filter the information. Route attribute set reference indicates that a route attribute set is referenced by a route-filter, and route-filter reference indicates that a route-filter is referenced by a routing protocol. To check the configuration and reference information about XPL extended community (SoO) sets, run the display xpl ext-community-list soo command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configuration and reference information about XPL extended community (SoO) sets.

<HUAWEI> display xpl ext-community-list soo state
Attached: Applied by at least one attach point
Unattached: Not applied by any attach point

Attached
---------------------------------------------------------------

Unattached
---------------------------------------------------------------
aaa

**Table 1** Description of the **display xpl ext-community-list soo** command output
Item	Description
Attached: Applied by at least one attach point	The SoO set is referenced at least once.
Unattached: Not applied by any attach point	The SoO set is not referenced.
Attached	SoO set that is referenced.
Unattached	SoO set that is not referenced.