display xpl large-community-list

Function

The display xpl large-community-list command displays the configuration and reference information about XPL Large-community sets.

Format

display xpl large-community-list state [ attached | unattached ]

display xpl large-community-list [ name xpl-name attachpoints ]

Parameters

Parameter	Description	Value
attached	Displays information about the Large-community sets that are referenced.	-
unattached	Displays information about the Large-community sets that are not referenced.	-
name xpl-name	Specifies the name of the Large-community sets.	The value is a string of 1 to 200 case-sensitive characters, spaces not supported. The string can contain letters, digits, underscores (_), hyphens (-), and dots (.). It must start with a letter or digit.
attachpoints	Displays information about points of attachment.	-
state	Displays information about Large-Community set configurations and references.	-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
route-base	read

Usage Guidelines

Usage Scenario

To view information about XPL route-filter and route attribute set configurations and references, run the display xpl command. If a large amount of information is output, you can specify attached or unattached to filter the information. Route attribute set reference indicates that a route attribute set is referenced by a route-filter, and route-filter reference indicates that a route-filter is referenced by a routing protocol. To check the configuration and reference information about XPL Large-community sets, run the display xpl large-community-list command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the configuration and reference information about XPL Large-community sets.

<HUAWEI> display xpl large-community-list state
Attached : Applied by at least one attach point
Unattached : Not applied by any attach point

Attached
---------------------------------------------------------------

Unattached
---------------------------------------------------------------
aaa

**Table 1** Description of the **display xpl large-community-list** command output
Item	Description
Attached	Large-community set that is referenced.
Attached : Applied by at least one attach point	The Large-community set is referenced at least once.
Unattached	Large-community set that is not referenced.
Unattached : Not applied by any attach point	The Large-community set is not referenced.