display alarm information

Function

The display alarm information command displays configurations of alarms.

Format

display alarm information name alarm-name

display alarm information

Parameters

Parameter	Description	Value
name alarm-name	Specifies the name of an alarm. This alarm must exist.	The value is a string of 1 to 31 characters. If no alarm name is specified, information about all alarms in the system will be displayed.

Parameter

Description

Value

name alarm-name

Specifies the name of an alarm. This alarm must exist.

The value is a string of 1 to 31 characters. If no alarm name is specified, information about all alarms in the system will be displayed.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
fault-mgr	read

Usage Guidelines

To obtain information about alarms in the system, run the display alarm information command.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display basic information about an alarm named ospfNbrStateChange.

<HUAWEI> display alarm information name ospfNbrStateChange
--------------------------------------------------------------------------------------
Feature             : OSPF
AlarmName           : ospfNbrStateChange
AlarmId             : 0x8900005
Severity            : Major
Cause suppress time : 1
Clear suppress time : 1
--------------------------------------------------------------------------------------

**Table 1** Description of the **display alarm information** command output
Item	Description
Feature	Feature for which the alarm is generated.
AlarmName	Alarm name.
AlarmId	Alarm ID.
Severity	Alarm severity.
Cause suppress time	Suppression period after which an alarm can be generated.
Clear suppress time	Suppression period after which an alarm can be cleared.