display configuration-occupied user

Function

The display configuration-occupied user command displays information about the user that locks the configuration set.

Format

display configuration-occupied user

Parameters

None

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
config	read

Usage Guidelines

You can run the display configuration-occupied user command to query the user that obtains configuration access. If the configuration set is not locked, a prompt is displayed to indicate that no user obtains exclusive configuration access.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the current user that locks the configuration set. The command output shows that no user locks the configuration set.

<HUAWEI> display configuration-occupied user

# Display the user that locks the configuration set.

<HUAWEI> display configuration-occupied user
User Index: 34
User Session Name: VTY 0
User Name: root
IP Address: 10.135.38.234
Locked Time: 2013-03-06 21:09:36
Last Configuration Time: 2013-03-06 21:09:36
The time out value of configuration right locked is: 30 second(s)

**Table 1** Description of the **display configuration-occupied user** command output
Item	Description
User Index	Index of a user.
User Session Name	Session name of a user, ranging from VTY0 to VTY14.
User Name	User name of logging.
IP Address	IP address of a user, valid for VTY users only.
Locked Time	Time when the configuration set is locked.
Last Configuration Time	Time when the user runs the last command.
The time out value of configuration right locked is	Time when the configuration right is locked.