display netconf session (All views)

Function

The display netconf session command displays information about a NETCONF session.

Format

display netconf session

Parameters

None

Views

All views

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
netconf	debug

Usage Guidelines

Usage Scenario

To view information about a NETCONF session, run the display netconf session command. The session information helps you to check failed connections or whether a maximum of sessions have been created.

A maximum of 100 capabilities with 128 bytes each can be displayed for a session.

If there are more than 100 capabilities, the system displays three dots at the end.
If the capability length is more than 128 bytes, the system displays two dots at the end.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display informations on NETCONF sessions.

<HUAWEI> system-view
[~HUAWEI] display netconf session
------------------------------------------------------------------------------------------------------------------------------------
NETCONF Session ID   : 18265
Transport            : netconf-ssh
User Name            : huawei
Host Identifier      : 10.1.1.1
Login Time           : 2019-09-17 17:37:02
Input Rpc            : 755
Input Bad Rpc        : 1
Output Rpc Error     : 12
Output Notification  : 0
------------------------------------------------------------------------------------------------------------------------------------

**Table 1** Description of the **display netconf session (All views)** command output
Item	Description
NETCONF Session ID	NETCONF session ID.
Transport	Transport type.
User Name	User Name.
Host Identifier	Host Identifier.
Login Time	Login Time.
Input Rpc	Counts of input RPC.
Input Bad Rpc	Counts of bad input RPC.
Output Rpc Error	Counts of output error RPC.
Output Notification	Counts of output notification.