display nqa-server

Function

The display nqa-server command displays the status of an NQA test server.

Format

display nqa-server

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
sla	read

Usage Guidelines

Usage Scenario

Both the server and client must be configured before starting a TCP or UDP jitter test instance. Otherwise, a test instance cannot be started.

If a TCP test instance is used, run the nqa-server tcpconnect command to enable a TCP server.
If a UDP jitter test instance used, run the nqa-server udpecho command to enable a UDP server.
The display nqa-server command displays the status of a server. Each time a server is enabled, the count of the servers of this type increases by one.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the status of all the NQA test servers.

<HUAWEI> display nqa-server
 NQA Server Max: 5000                   NQA Server Num: 3                     
 NQA Concurrent TCP Server: 1           NQA Concurrent UDP Server: 2          
 NQA Concurrent ICMP Server: 0         
 nqa-server tcpconnect 10.1.1.2 6789 NOTINSERVICE
 nqa-server udpecho 192.168.1.2 6789 NOTINSERVICE
 nqa-server udpecho 172.16.1.1 6789 ACTIVE Hardware-based

**Table 1** Description of the **display nqa-server** command output
Item	Description
NQA Server Max	Maximum number of NQA servers allowed to be configured.
NQA Server Num	Total number of existing NQA servers.
NQA Concurrent TCP Server	Number of configured TCP servers.
NQA Concurrent UDP Server	Number of configured UDP servers.
NQA Concurrent ICMP Server	Number of configured ICMP servers.