display version

Function

The display version command displays the version of the system.

Format

display version

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
system	read

Usage Guidelines

Usage Scenario

To view the version of the current system software before you perform an upgrade, run the display version command. If the current version is the same as or later than the target version, no software upgrade is needed.
If a problem occurs and cannot be located during the upgrade, contact technical support personnel for fault locating.

Configuration Impact

This command helps view various system information, such as the current software version, chassis type, main control board, and interface board.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the system version.(The actual command output varies according to the device. The output information is only an example.)

<HUAWEI> display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 8.210 (NetEngine 8000 F V800R021C00SPC100)
Copyright (C) 2012-2021 Huawei Technologies Co., Ltd.
HUAWEI NetEngine 8000 F1A-8H20Q uptime is 1 day, 1 hours, 1 minutes

**Table 1** Description of the **display version** command output
Item	Description
Huawei Versatile Routing Platform Software	Huawei VRP.
Version	Specific system version.