display access-user item

Function

The display access-user item command displays information about all access users.

Format

For NetEngine 8000 F1A:

display access-user [ { username username [ match-quote-context ] } | accounting-state { idle | ready | accounting | leaving-flow-query | wait-acct-start | wait-acct-stop } | { map-t | map-e } | radius-attribute hw-avpair lease-timeout-offline | cgn-centralized-user | radius-server-group radius-server-group | web-auth-server { web-auth-server | web-auth-server6 } | user-traffic { overflow | { [ ipv4 | ipv6 ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } } | service-traffic { [ edsg service-policy-name ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } | light-traffic-user [ inbound | outbound | both ] { interval interval | start-time start-time date end-time start-time date } | link-account [ include ] link-account-info | { value-added-service { bod | edsg | daa } | service-type { bod | edsg } } | service-policy service-policy-name | slot slot-id [ card card-number ] | domain domain-name | map-domain map-domain-name | vpn-instance vpn-instance-name [ inbound ] | remote-name tunnel-name | lac-ip-address lac-ip-address | time time-number | option37 option37-user-mac-address | radius-attribute-inexistence qos-profile | user-group user-group-name | ip-pool ip-pool-name | ip-pool-group ip-pool-group | ipv6-pool ipv6-pool-name | lns-ip-address lns-ip-address | public-ip-address public-ip-address | cgn-pub-user [ dhcp | exclude-dhcp ] | cgn-user | { nat-instance | dslite-instance } nat-instance-name | remote-acl classifier classifier-name | access-type vlan-ip | assigned-attribute { framed-route | framed-ip-netmask } * | user-type { ipv4 | ipv6 | dual-stack | pppoe | dhcp | lac | lns | layer2-leased-line | l2vpn-leased-line | layer3-leased-line | layer2-static | layer3-static | lts | lac-tunnel | lns-tunnel | eap-relay | eap-end } | authen-method { none | local | radius | hwtacacs | radius-proxy [ web | eap ] } | { normal | { { rui-local | rui-remote } | { master | slave } } * } | { qos-profile qos-profile-name | family-qos-profile family-qos-profile-name | resource-insufficient user-queue } [ inbound | outbound | both ] | ip-type { ipv4 | { { ipv6 | dual-stack } [ ipv6-address-protocol { nd | dhcpv6 } | ipv6-cpe-mode { ipv6 | ipv6-pd } * ] * } } | { interface { { { interface-name | interface-type interface-number } [ trunk-member trunk-member-name ] } [ all ] } | { pevlan pevlan-id [ end-pevlan-id ] [ cevlan ce-vlan-id [ end-cevlan-id ] ] } } * [ sequence ] | user-state { standby | active } | traffic-policy policy-name | realtime-flow-rate [ ipv4 | ipv6 ] { inbound { above rate-inbound-above-value | below rate-inbound-below-value } * | outbound { above rate-outbound-above-value | below rate-outbound-below-value } * } * ] * remote-id [ | include ] include-text

display access-user [ { username username [ match-quote-context ] } | accounting-state { idle | ready | accounting | leaving-flow-query | wait-acct-start | wait-acct-stop } | { map-t | map-e } | radius-attribute hw-avpair lease-timeout-offline | cgn-centralized-user | radius-server-group radius-server-group | web-auth-server { web-auth-server | web-auth-server6 } | user-traffic { overflow | { [ ipv4 | ipv6 ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } } | service-traffic { [ edsg service-policy-name ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } | light-traffic-user [ inbound | outbound | both ] { interval interval | start-time start-time date end-time start-time date } | link-account [ include ] link-account-info | { value-added-service { bod | edsg | daa } | service-type { bod | edsg } } | service-policy service-policy-name | slot slot-id [ card card-number ] | domain domain-name | map-domain map-domain-name | vpn-instance vpn-instance-name [ inbound ] | remote-name tunnel-name | lac-ip-address lac-ip-address | time time-number | option37 option37-user-mac-address | radius-attribute-inexistence qos-profile | user-group user-group-name | ip-pool ip-pool-name | ip-pool-group ip-pool-group | ipv6-pool ipv6-pool-name | lns-ip-address lns-ip-address | public-ip-address public-ip-address | cgn-pub-user [ dhcp | exclude-dhcp ] | cgn-user | { nat-instance | dslite-instance } nat-instance-name | remote-acl classifier classifier-name | access-type vlan-ip | assigned-attribute { framed-route | framed-ip-netmask } * | user-type { ipv4 | ipv6 | dual-stack | pppoe | dhcp | lac | lns | layer2-leased-line | l2vpn-leased-line | layer3-leased-line | layer2-static | layer3-static | lts | lac-tunnel | lns-tunnel | eap-relay | eap-end } | authen-method { none | local | radius | hwtacacs | radius-proxy [ web | eap ] } | { normal | { { rui-local | rui-remote } | { master | slave } } * } | { qos-profile qos-profile-name | family-qos-profile family-qos-profile-name | resource-insufficient user-queue } [ inbound | outbound | both ] | ip-type { ipv4 | { { ipv6 | dual-stack } [ ipv6-address-protocol { nd | dhcpv6 } | ipv6-cpe-mode { ipv6 | ipv6-pd } * ] * } } | { interface { { { interface-name | interface-type interface-number } [ trunk-member trunk-member-name ] } [ all ] } | { pevlan pevlan-id [ end-pevlan-id ] [ cevlan ce-vlan-id [ end-cevlan-id ] ] } } * [ sequence ] | user-state { standby | active } | traffic-policy policy-name | realtime-flow-rate [ ipv4 | ipv6 ] { inbound { above rate-inbound-above-value | below rate-inbound-below-value } * | outbound { above rate-outbound-above-value | below rate-outbound-below-value } * } * ] * circuit-id [ | include ] include-text

For NetEngine 8000 F1A, NetEngine 8000 F2A:

display access-user [ { username [ | include ] username [ match-quote-context ] } | accounting-state { idle | ready | accounting | leaving-flow-query | wait-acct-start | wait-acct-stop } | { map-t | map-e } | radius-attribute hw-avpair lease-timeout-offline | cgn-centralized-user | radius-server-group radius-server-group | web-auth-server { web-auth-server | web-auth-server6 } | user-traffic { overflow | { [ ipv4 | ipv6 ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } } | service-traffic { [ edsg service-policy-name ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } | light-traffic-user [ inbound | outbound | both ] { interval interval | start-time start-time date end-time start-time date } | link-account [ include ] link-account-info | { value-added-service { bod | edsg | daa } | service-type { bod | edsg } } | service-policy service-policy-name | slot slot-id [ card card-number ] | domain domain-name | map-domain map-domain-name | vpn-instance vpn-instance-name [ inbound ] | remote-name tunnel-name | lac-ip-address lac-ip-address | time time-number | option37 option37-user-mac-address | radius-attribute-inexistence qos-profile | user-group user-group-name | ip-pool ip-pool-name | ip-pool-group ip-pool-group | ipv6-pool ipv6-pool-name | lns-ip-address lns-ip-address | public-ip-address public-ip-address | cgn-pub-user [ dhcp | exclude-dhcp ] | cgn-user | { nat-instance | dslite-instance } nat-instance-name | access-type vlan-ip | assigned-attribute { framed-route | framed-ip-netmask } * | user-type { ipv4 | ipv6 | dual-stack | pppoe | dhcp | lac | lns | layer2-leased-line | l2vpn-leased-line | layer3-leased-line | layer2-static | layer3-static | lts | lac-tunnel | lns-tunnel | eap-relay | eap-end } | authen-method { none | local | radius | hwtacacs | radius-proxy [ web | eap ] } | { normal | { { rui-local | rui-remote } | { master | slave } } * } | { qos-profile qos-profile-name | family-qos-profile family-qos-profile-name | resource-insufficient user-queue } [ inbound | outbound | both ] | ip-type { ipv4 | { { ipv6 | dual-stack } [ ipv6-address-protocol { nd | dhcpv6 } | ipv6-cpe-mode { ipv6 | ipv6-pd } * ] * } } | { interface { { { interface-name | interface-type interface-number } [ trunk-member trunk-member-name ] } [ all ] } | { pevlan pevlan-id [ end-pevlan-id ] [ cevlan ce-vlan-id [ end-cevlan-id ] ] } } * [ sequence ] | user-state { standby | active } | traffic-policy policy-name | realtime-flow-rate [ ipv4 | ipv6 ] { inbound { above rate-inbound-above-value | below rate-inbound-below-value } * | outbound { above rate-outbound-above-value | below rate-outbound-below-value } * } * ] * verbose nop

display access-user [ { username [ | include ] username [ match-quote-context ] } | accounting-state { idle | ready | accounting | leaving-flow-query | wait-acct-start | wait-acct-stop } | { map-t | map-e } | radius-attribute hw-avpair lease-timeout-offline | cgn-centralized-user | radius-server-group radius-server-group | web-auth-server { web-auth-server | web-auth-server6 } | user-traffic { overflow | { [ ipv4 | ipv6 ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } } | service-traffic { [ edsg service-policy-name ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } | light-traffic-user [ inbound | outbound | both ] { interval interval | start-time start-time date end-time start-time date } | link-account [ include ] link-account-info | { value-added-service { bod | edsg | daa } | service-type { bod | edsg } } | service-policy service-policy-name | slot slot-id [ card card-number ] | domain domain-name | map-domain map-domain-name | vpn-instance vpn-instance-name [ inbound ] | remote-name tunnel-name | lac-ip-address lac-ip-address | time time-number | option37 option37-user-mac-address | radius-attribute-inexistence qos-profile | user-group user-group-name | ip-pool ip-pool-name | ip-pool-group ip-pool-group | ipv6-pool ipv6-pool-name | lns-ip-address lns-ip-address | public-ip-address public-ip-address | cgn-pub-user [ dhcp | exclude-dhcp ] | cgn-user | { nat-instance | dslite-instance } nat-instance-name | remote-acl classifier classifier-name | access-type vlan-ip | assigned-attribute { framed-route | framed-ip-netmask } * | user-type { ipv4 | ipv6 | dual-stack | pppoe | dhcp | lac | lns | layer2-leased-line | l2vpn-leased-line | layer3-leased-line | layer2-static | layer3-static | lts | lac-tunnel | lns-tunnel | eap-relay | eap-end } | authen-method { none | local | radius | hwtacacs | radius-proxy [ web | eap ] } | { normal | { { rui-local | rui-remote } | { master | slave } } * } | { qos-profile qos-profile-name | family-qos-profile family-qos-profile-name | resource-insufficient user-queue } [ inbound | outbound | both ] | ip-type { ipv4 | { { ipv6 | dual-stack } [ ipv6-address-protocol { nd | dhcpv6 } | ipv6-cpe-mode { ipv6 | ipv6-pd } * ] * } } | { interface { { { interface-name | interface-type interface-number } [ trunk-member trunk-member-name ] } [ all ] } | { pevlan pevlan-id [ end-pevlan-id ] [ cevlan ce-vlan-id [ end-cevlan-id ] ] } } * [ sequence ] | user-state { standby | active } | traffic-policy policy-name | realtime-flow-rate [ ipv4 | ipv6 ] { inbound { above rate-inbound-above-value | below rate-inbound-below-value } * | outbound { above rate-outbound-above-value | below rate-outbound-below-value } * } * ] * [ summary | brief ]

display access-user [ { username [ | include ] username [ match-quote-context ] } | accounting-state { idle | ready | accounting | leaving-flow-query | wait-acct-start | wait-acct-stop } | { map-t | map-e } | radius-attribute hw-avpair lease-timeout-offline | cgn-centralized-user | radius-server-group radius-server-group | web-auth-server { web-auth-server | web-auth-server6 } | user-traffic { overflow | { [ ipv4 | ipv6 ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } } | service-traffic { [ edsg service-policy-name ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } | light-traffic-user [ inbound | outbound | both ] { interval interval | start-time start-time date end-time start-time date } | link-account [ include ] link-account-info | { value-added-service { bod | edsg | daa } | service-type { bod | edsg } } | service-policy service-policy-name | slot slot-id [ card card-number ] | domain domain-name | map-domain map-domain-name | vpn-instance vpn-instance-name [ inbound ] | remote-name tunnel-name | lac-ip-address lac-ip-address | time time-number | option37 option37-user-mac-address | radius-attribute-inexistence qos-profile | user-group user-group-name | ip-pool ip-pool-name | ip-pool-group ip-pool-group | ipv6-pool ipv6-pool-name | lns-ip-address lns-ip-address | public-ip-address public-ip-address | cgn-pub-user [ dhcp | exclude-dhcp ] | cgn-user | { nat-instance | dslite-instance } nat-instance-name | remote-acl classifier classifier-name | access-type vlan-ip | assigned-attribute { framed-route | framed-ip-netmask } * | user-type { ipv4 | ipv6 | dual-stack | pppoe | dhcp | lac | lns | layer2-leased-line | l2vpn-leased-line | layer3-leased-line | layer2-static | layer3-static | lts | lac-tunnel | lns-tunnel | eap-relay | eap-end } | authen-method { none | local | radius | hwtacacs | radius-proxy [ web | eap ] } | { normal | { { rui-local | rui-remote } | { master | slave } } * } | { qos-profile qos-profile-name | family-qos-profile family-qos-profile-name | resource-insufficient user-queue } [ inbound | outbound | both ] | ip-type { ipv4 | { { ipv6 | dual-stack } [ ipv6-address-protocol { nd | dhcpv6 } | ipv6-cpe-mode { ipv6 | ipv6-pd } * ] * } } | { interface { { { interface-name | interface-type interface-number } [ trunk-member trunk-member-name ] } [ all ] } | { pevlan pevlan-id [ end-pevlan-id ] [ cevlan ce-vlan-id [ end-cevlan-id ] ] } } * [ sequence ] | user-state { standby | active } | traffic-policy policy-name | realtime-flow-rate [ ipv4 | ipv6 ] { inbound { above rate-inbound-above-value | below rate-inbound-below-value } * | outbound { above rate-outbound-above-value | below rate-outbound-below-value } * } * ] * { item } [ ipv6-address | vlanpvc | slot | access-time | access-type | accounting-state | qos-profile | family-qos-profile | accounting-start-time | down-packets-number | inbound-cir | lac-info | lns-info | online-time | outbound-cir | portal-url | radius-authen-server | up-packets-number | edsg-policy | web-url ] * [ radius-flag ]

display access-user [ { username [ | include ] username [ match-quote-context ] } | accounting-state { idle | ready | accounting | leaving-flow-query | wait-acct-start | wait-acct-stop } | { map-t | map-e } | radius-attribute hw-avpair lease-timeout-offline | cgn-centralized-user | radius-server-group radius-server-group | web-auth-server { web-auth-server | web-auth-server6 } | user-traffic { overflow | { [ ipv4 | ipv6 ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } } | service-traffic { [ edsg service-policy-name ] { inbound { above value-high value-low | below value-high value-low } * | outbound { above value-high value-low | below value-high value-low } * } * } | light-traffic-user [ inbound | outbound | both ] { interval interval | start-time start-time date end-time start-time date } | link-account [ include ] link-account-info | { value-added-service { bod | edsg | daa } | service-type { bod | edsg } } | service-policy service-policy-name | slot slot-id [ card card-number ] | domain domain-name | map-domain map-domain-name | vpn-instance vpn-instance-name [ inbound ] | remote-name tunnel-name | lac-ip-address lac-ip-address | time time-number | option37 option37-user-mac-address | radius-attribute-inexistence qos-profile | user-group user-group-name | ip-pool ip-pool-name | ip-pool-group ip-pool-group | ipv6-pool ipv6-pool-name | lns-ip-address lns-ip-address | public-ip-address public-ip-address | cgn-pub-user [ dhcp | exclude-dhcp ] | cgn-user | { nat-instance | dslite-instance } nat-instance-name | remote-acl classifier classifier-name | access-type vlan-ip | assigned-attribute { framed-route | framed-ip-netmask } * | user-type { ipv4 | ipv6 | dual-stack | pppoe | dhcp | lac | lns | layer2-leased-line | l2vpn-leased-line | layer3-leased-line | layer2-static | layer3-static | lts | lac-tunnel | lns-tunnel | eap-relay | eap-end } | authen-method { none | local | radius | hwtacacs | radius-proxy [ web | eap ] } | { normal | { { rui-local | rui-remote } | { master | slave } } * } | { qos-profile qos-profile-name | family-qos-profile family-qos-profile-name | resource-insufficient user-queue } [ inbound | outbound | both ] | ip-type { ipv4 | { { ipv6 | dual-stack } [ ipv6-address-protocol { nd | dhcpv6 } | ipv6-cpe-mode { ipv6 | ipv6-pd } * ] * } } | { interface { { { interface-name | interface-type interface-number } [ trunk-member trunk-member-name ] } [ all ] } | { pevlan pevlan-id [ end-pevlan-id ] [ cevlan ce-vlan-id [ end-cevlan-id ] ] } } * [ sequence ] | user-state { standby | active } | traffic-policy policy-name | realtime-flow-rate [ ipv4 | ipv6 ] { inbound { above rate-inbound-above-value | below rate-inbound-below-value } * | outbound { above rate-outbound-above-value | below rate-outbound-below-value } * } * ] * verbose [ count count ]

Parameters

Parameter Description Value
include

Match the users with the specified string.

-
include-text

Include information.

NOTE:

This parameter is supported only on the NetEngine 8000 F1A.

The value is in text format. The value ranges from 1 to 200.
circuit-id

Circuit ID.

NOTE:

This parameter is supported only on the NetEngine 8000 F1A.

-
username username

Displays information about the access users with specified user name.

The value is a string of 1 to 253 characters.
match-quote-context

Displays information about access users whose user names contain spaces.

If user names contain spaces, enclose the user names with double quotation marks ("") to carry the.

match-quote-context keyword and check user information based on the user names.

The.

match-quote-context keyword can be associated only when user names are enclosed using double quotation marks ("").

-
accounting-state

Displays information about online users based on a specified accounting state.

  • idle: Displays information about online users in the idle accounting state.
  • ready: Displays information about online users in the ready accounting state.
  • accounting: Displays information about online users for whom accounting is being performed.
  • leaving-flow-query: Displays information about online users whose offline traffic is being queried during the logout process.
  • wait-acct-start: Displays information about online users whose offline traffic is being queried during the logout process.
  • wait-acct-stop: Displays information about online users waiting for an Accounting Stop response from the RADIUS server.

-
idle

Idle.

-
ready

Ready.

-
accounting

Accounting.

-
leaving-flow-query

Leaving-flow-query.

-
wait-acct-start

Wait accounting start.

-
wait-acct-stop

Wait accounting stop.

-
map-t

Displays MAP-T user information.

-
map-e

Displays MAP-E user information.

-
radius-attribute

Radius attribute inexistence.

-
hw-avpair

Hw avpair.

-
lease-timeout-offline

Displays information about the access users who owe fees.

-
cgn-centralized-user

Displays CGN centralized user information.

-
radius-server-group radius-server-group

Displays information about the access users who use the specified Radius server group.

The value is a string of 1 to 32 characters, including characters A to Z and a to z (case-sensitive), numerals (0 to 9), punctuation mark (.), dash (-), and underline (_).
web-auth-server web-auth-server

Displays information about the access users who are authenticated by the web authentication server with a specified IPv4 address.

The value is in dotted decimal notation.
web-auth-server6

Web-auth-server ipv6 address.

The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.
user-traffic

User traffic.

-
overflow

Displays information about the access users with abnormal traffic rates.

-
ipv4

Ipv4 address.

-
ipv6

Ipv6 address.

-
inbound

Specifies inbound direction.

-
above

Above.

-
above rate-inbound-above-value

Displays the users whose real-time upstream traffic rate is greater than or equal to the specified rate.

The value is an integer ranging from 0 to 4294967295, in kbyte/min. When ui-mode type2 is configured, the unit is kbit/s.
above rate-outbound-above-value

Displays the users whose real-time downstream traffic rate is greater than or equal to the specified rate.

The value is an integer ranging from 0 to 4294967295, in kbyte/min. When ui-mode type2 is configured, the unit is kbit/s.
value-high

Value of high.

The value is an integer ranging from 0 to 4294967295.
value-low

Value of low.

The value is an integer ranging from 0 to 4294967295.
below

Below.

-
below rate-inbound-below-value

Displays the users whose real-time upstream traffic rate is less than the specified rate.

The value is an integer ranging from 0 to 4294967295, in kbyte/min. When ui-mode type2 is configured, the unit is kbit/s.
below rate-outbound-below-value

Displays the users whose real-time downstream traffic rate is less than the specified rate.

The value is an integer ranging from 0 to 4294967295, in kbyte/min. When ui-mode type2 is configured, the unit is kbit/s.
outbound

Specifies outbound direction.

-
service-traffic

Service traffic.

-
edsg

EDSG.

-
light-traffic-user

Displays information about users whose traffic is light in many statistics collection periods.

-
both

Specifies inbound and outbound direction.

-
interval

Interval.

-
interval

Interval.

The value is an integer ranging from 1 to 525600.
start-time

Start time.

-
start-time

Start time.

HH:MM:SS
date

Date.

YYYY-MM-DD
end-time

End time.

-
link-account

Online user with the specified link-account information.

-
link-account-info

Online user with the specified link-account information.

The value is an integer ranging from 1 to 240.
value-added-service

Value-added service.

-
bod

BOD.

-
daa

Displays information about users with a destination address accounting service type.

-
service-type

Service type.

-
service-policy service-policy-name

Displays information about users with a specified service policy.

The value is a string of 1 to 200 case-sensitive characters, spaces not supported.
slot slot-id

Specifies the ID of the slot where a board resides.

The value is a string of 1 to 15 case-sensitive characters, spaces not supported.
card card-number

Specifies a subcard ID. The subcard ID range is determined by the device model.

The value is a string of 0 to 65535 case-sensitive characters, spaces not supported.
domain domain-name

Displays information about online users in the specified domain.

The value is a string of 1 to 64 case-insensitive characters.
map-domain map-domain-name

Displays information about online users in a specified mapping domain.

The value is a string of 1 to 64 case-insensitive characters.
vpn-instance vpn-instance-name

Displays information about online user bound to the specified VPN instance.

The value is a string of 1 to 31 case-sensitive characters. If spaces are used, the string must start and end with double quotation marks (").
remote-name tunnel-name

Displays information about online users who use the specified LAC tunnel to access the LNS.

The value is a string of 1 to 253 characters.
lac-ip-address lac-ip-address

Displays information about online users on the tunnel with a specified source IP address on the LNS.

The value is in dotted decimal notation.
time time-number

Displays information about the online users in a specified time period.

The value ranges from 1 to 7200, in seconds.
option37

Displays information about the online users in a specified option37.

-
option37-user-mac-address

Option 37 user MAC address.

H-H-H
radius-attribute-inexistence

Radius attribute inexistence.

-
qos-profile qos-profile-name

Displays information about online users with specified qos profile.

The value is a string of 1 to 63 case-sensitive characters, spaces not supported.
qos-profile

Qos profile.

-
user-group user-group-name

Displays information about online users in a specified user group.

The value is a string of 1 to 32 characters.
ip-pool ip-pool-name

Displays information about online users in a specified IPv4 address pool.

The value is a string of 1 to 128 case-insensitive characters.
ip-pool-group ip-pool-group

Displays information about online users in a specified IPv4 address pool group.

The value is a string of 1 to 128 case-insensitive characters.
ipv6-pool ipv6-pool-name

Displays information about online users in a specified IPv6 address pool.

The value is a string of 1 to 32 characters.
lns-ip-address lns-ip-address

Displays information about online users on the tunnel with a specified lns IP address on the LAC.

The value is in dotted decimal notation.
public-ip-address public-ip-address

Public IP address of a CGN user.

The value is in dotted decimal notation.
cgn-pub-user

Displays information about online CGN public network users.

-
dhcp

Displays information about online DHCP CGN public network users.

-
dhcp

Dhcp.

-
exclude-dhcp

Displays information about online non-DHCP CGN public network users.

-
cgn-user

Displays CGN user information.

-
nat-instance

Displays information about users of a specified NAT instance.

-
dslite-instance

Specify the ds-lite instance.

-
nat-instance-name

NAT instance name.

The value is a string of 1 to 31 characters.
remote-acl

Remote-acl.

-
classifier classifier-name

Displays information about online users matching a specific traffic classifier.

The value is a string of 1 to 127 characters.
access-type

Displays information about users with a specified access type.

-
vlan-ip

Vlan-ip.

-
assigned-attribute

Displays information about online users with RADIUS attributes delivered by the RADIUS server.

-
framed-route

Displays information about online users with the No. 22 RADIUS attribute Framed-Route.

-
framed-ip-netmask

Displays information about online users with the No. 9 RADIUS attribute Framed-IP-Netmask.

-

-
user-type

layer2-leased-line: Displays information about Layer2 leased line online users.

l2vpn-leased-line: Displays information about L2-vpn leased line online users.

layer3-leased-line: Displays information about Layer3 leased line online users.

layer2-static: Displays information about Layer 2 static online users.

layer3-static: Displays information about Layer 3 static online users.

lts: Displays information about LTS online users.

lac-tunnel: Displays information about LAC tunnel online users.

lns-tunnel: Displays information about LNS tunnel online users.

eap-relay: Displays information about EAP relay online users.

eap-end: Displays information about EAP end online users.

-
dual-stack

Dual-stack.

-
pppoe

Pppoe.

-
lac

LAC.

-
lns

lns.

-
layer2-leased-line

Layer 2 leased line.

-
l2vpn-leased-line

L2-vpn leased line.

-
layer3-leased-line

Layer 3 leased line.

-
layer2-static

Layer 2 static.

-
layer3-static

Layer 3 static.

-
lts

L2TP Tunnel Switch.

-
lac-tunnel

LAC tunnel.

-
lns-tunnel

LNS tunnel.

-
eap-relay

EAP relay.

-
eap-end

EAP end.

-
authen-method

Displays information about online users through an authentication mode.

none: Displays information about online users without being authenticated.

local: Displays information about online users through the local authentication.

radius: Displays information about online users through a RADIUS server authentication.

hwtacacs: Displays information about online users through an HWTACACS server authentication.

radius-proxy: Displays information about online users through an HWTACACS server authentication.

-
none

No authentication.

-
local

Local authentication.

-
radius

Radius authentication.

-
hwtacacs

Hwtacacs authentication.

-
radius-proxy

Radius-proxy authentication.

-
web

Specific accounting service policy.

-
eap

Eap cid.

-
normal

Displays information about the non-RUI access users.

-
rui-local

Displays information about RUI users who go online with IP addresses assigned from a local address pool.

-
rui-remote

Displays information about RUI users who go online with IP addresses assigned from a remote address pool.

-
master

Displays information about users whose user status is master.

-
slave

Displays information about users whose user status is slave.

-
family-qos-profile family-qos-profile-name

Displays information about online users with specified family profile.

The value is a string of 1 to 63 case-sensitive characters, spaces not supported.
resource-insufficient

Displays information about online users that user queue resources fail to be allocated.

-
user-queue

User-queue resource allocated fail.

-
ip-type

Displays information about online users with the specified ip address type.

ipv4: Displays information about online ipv4 users.

ipv6: Displays information about online ipv6 users.

dual-stack: Displays information about online dual-stack users.

-
ipv6-address-protocol

Displays information about online users that obtain IPv6 addresses using a specified protocol.

nd: Displays information about online users that obtain IPv6 addresses using an ND protocol.

dhcpv6: Displays information about online users that obtain IPv6 addresses using an DHCPv6 protocol.

-
nd

Exist slot number.

-
dhcpv6

Static ipv6 neighbor cache entries.

-
ipv6-cpe-mode

Displays information about online users with a specified CPE mode.

ipv6: Displays information about online users that use CPE to obtain IPv6 addresses.

ipv6-pd: Displays information about online users that use CPE to obtain IPv6 prefixes.

-
ipv6-pd

Config ipv6 pd.

-
interface interface-type interface-number

Displays information about online users on a specified interface.

-
trunk-member trunk-member-name

Displays information about the access users on a specified member interface of an Eth-Trunk interface. If you specify trunk-member, the command displays information about the access users on a member interface of an Eth-Trunk interface. If you do not specify trunk-member, the command displays information about the access users on an Eth-Trunk interface.

The value is a string of 1 to 63 characters.
all

Displays information about the users that access the device through the interface and its sub-interfaces. This parameter is used after the interface number is configured.

-
pevlan pevlan-id

Displays information about the access users in the specified VLAN of an interface. The interface can be an Ethernet interface only. pevlan-id specifies the ID of a VLAN. When the value of pevlan-id is 0, user information that does not carrying VLAN IDs is displayed, including the administrator information.

The value is an integer ranging from 0 to 4094.
end-pevlan-id

Specifies the end VLAN ID of the outer VLAN range. end-pevlan-id must be greater than or equal to pevlan vlan-id.

The value is an integer ranging from 0 to 4094.
cevlan ce-vlan-id

Displays information about the access users in a specified inner VLAN on the interface. cevlan-id specifies the ID of a inner VLAN.

The value is an integer ranging from 0 to 4094.
end-cevlan-id

Specifies the end VLAN ID of the outer VLAN range. end-cevlan-id must be greater than or equal to cevlan vlan-id.

The value is an integer ranging from 0 to 4094.
sequence

Displays access user information based on PE VLAN IDs and CE VLAN IDs in ascending order. A PE VLAN ID takes precedence over a CE VLAN ID. If this parameter is not specified, the access user information is displayed based on CIDs in ascending order. The earlier a user accesses the device, the smaller the user's CID is.

-
user-state

Displays information about access users in a specified state.

If standby is configured, information about users in the standby state is displayed.

If active is configured, information about users in the active state is displayed.

-
standby

Standby.

-
active

Active.

-
traffic-policy

Access specific traffic policy.

-
policy-name

Specify the next traffic policy of the flow.

The value is a string of 1 to 127 case-sensitive characters, spaces not supported.
realtime-flow-rate

Realtime flow rate.

-
remote-id

Remote ID.

NOTE:

This parameter is supported only on the NetEngine 8000 F1A.

-
verbose

Displays verbose information about access users.

-
nop

Displays abnormal offline records about a user. During record displaying, you do not need to enter Y or N to check whether to display the next record.

-
summary

Displays summary information about access users, including the total number of access users, the number of RUI access users, and the number of non-RUI access users.

-
brief

Displays information about online user, including user id, user name, interface, user mac address, user ip address, or user ipv6 address.

-
item

Displays access user information as specified.

  • ipv6-address: displays the ipv6-address field in access user information.
  • vlanpvc: displays the vlanpvc field in access user information.
  • slot: displays the slot field in access user information.
  • access-time: displays the access-time field in access user information.
  • access-type: displays the access-type field in access user information.
  • accounting-state: displays the accounting-state field in access user information.
  • qos-profile: displays the qos-profile field in access user information.
  • family-qos-profile: displays the family-qos-profile field in access user information.
  • accounting-start-time: displays the accounting-start-time field in access user information.
  • down-packets-number: displays the down-packets-number field in access user information.
  • inbound-cir: displays the inbound-cir field in access user information.
  • lac-info : displays the lac-info field in access user information.
  • lns-info : displays the lns-info field in access user information.
  • online-time: displays the online-time field in access user information.
  • outbound-cir: displays the outbound-cir field in access user information.
  • portal-url : displays the portal-url field in access user information.
  • radius-authen-server: displays the radius-authen-server field in access user information.
  • up-packets-number: displays the up-packets-number field in access user information.
  • edsg-policy: displays the edsg-policy field in access user information.
  • web-url : displays the web-url field in access user information.
  • radius-flag : displays the radius-flag field in access user information.

-
vlanpvc

Vlan or PVC.

-
access-time

Access time.

-
accounting-start-time

Accounting start time.

-
down-packets-number

Down packets number.

-
inbound-cir

Inbound cir.

-
lac-info

LAC information.

-
lns-info

LNS information.

-
online-time

Online time.

-
portal-url

Portal url.

-
radius-authen-server

IP Up packets number.

-
up-packets-number

Number of packets sent by users.

-
edsg-policy

Enhanced dynamic service gateway policy.

-
web-url

Web url.

-
radius-flag

Radius flag.

-
count count

Specifies the number of abnormal offline records to be displayed.

The value is an integer that ranges from 1 to 4294967295.
|

Matching output.

-

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name Operations
aaa-access read

Usage Guidelines

Usage Scenario

To view the information about the access users or locate the user access fault, you can run the display access-user command to view the information about all access users. You can also view information about access users on the device by specifying the domain name, interface name, user name, and so on.

In detailed information about access users, (Radius) is displayed for each attribute delivered by the RADIUS server.

Precautions

In VS mode, this command is supported only by the admin VS.

If the command output contains "Info: No online user!", the number of queried users based on the specified parameter is 0 or the device does not support query based on the specified parameter.

If the user is a dual-stack user and the accounting dual-stack identical command is run in the domain to which the user belongs, the IPv6 traffic is counted into the IPv4 traffic. In this case, the IPv6 traffic and real-time traffic rate of the user are both 0. Therefore, users are filtered based on the real-time IPv4 traffic rate in this case.

If the user is an IPv4 single-stack user, the IPv6 traffic and real-time traffic rate of the user are both 0. In this case, when the users whose real-time IPv6 traffic rate is greater than or equal to 0 or less than the specified value is filtered, statistics about the IPv4 user can be collected.

If the user is an IPv6 single-stack user, the IPv4 traffic and real-time traffic rate of the user are both 0. In this case, when the users whose real-time IPv4 traffic rate is greater than or equal to 0 or less than the specified value is filtered, statistics about the IPv6 user can be collected.

If statistics about the service traffic and user traffic are separately collected, the display access-user realtime-flow-rate command displays users based on user traffic, without considering the service traffic.

The display access-user light-traffic-user command displays information about users with abnormal traffic. In the physical RUI scenario, the traffic statistics reported by the backup device is always 0. Therefore, all users on the backup device are users with abnormal traffic. As such, you cannot run this command to query information about users based on actual user traffic.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display information about all access users.
<HUAWEI> display access-user
------------------------------------------------------------------------------
  Total users                        : 9
  IPv4 users                         : 9
  IPv6 users                         : 0
  Dual-Stack users                   : 0
  Lac users                          : 0
  RUI local users                    : 0
  RUI remote users                   : 0
  Wait authen-ack                    : 0
  Authentication success             : 9
  Accounting ready                   : 9
  Accounting state                   : 0
  Wait leaving-flow-query            : 0
  Wait accounting-start              : 0
  Wait accounting-stop               : 0
  Wait authorization-client          : 0
  Wait authorization-server          : 0
  ------------------------------------------------------------------------------
  Domain-name                        Online-user
  ------------------------------------------------------------------------------
  default0                           : 0
  default1                           : 0
  default_admin                      : 0
  wq                                 : 0
  chen                               : 0
  isp7                               : 0
  gaoli                              : 0
  ly                                 : 0
  test                               : 0
  lsh                                : 9
  ------------------------------------------------------------------------------
  The used CID table are             :
  20-28
  ------------------------------------------------------------------------------
# Display the verbose information about a domain named sd2.
<HUAWEI> display access-user domain sd2 verbose
  -------------------------------------------------------------------           
Basic:                                                                          
  User access index             : 0                                             
  State                         : Used                                          
  User name                     : R5-01222001200000@sd2                         
  Domain name                   : sd2                                           
  Map domain name               : home
  User backuped from            : Local                                         
  RUI user state                : Master                                        
  User access interface         : Eth-Trunk22.12                                
  User access PeVlan/CeVlan     : 12/-                                          
  User access slot              : 1                                             
  User MAC                      : 00e0-fc12-3456                                
  User IP address               : 192.168.1.100                                    
  User IP netmask               : 255.255.255.255  
  User gateway address          : 192.168.1.1                                      
  User Authen IP Type           : ipv4/-/-                                      
  User Basic IP Type            : -/-/-                                         
  Server IP                     : 192.168.1.1
  User lease                    : 2012-01-22 17:55:34---2012-01-25 17:55:34     
  Remain lease(sec)                  : 257588                                        
  User access type              : IPOE                                          
  User authentication type      : Bind authentication                           
  Agent-Circuit-Id              : -                                             
  Agent-Remote-Id               : -                                             
  Access-line-id Information(dhcpv4 option82): -                                
  Access start time             : 2012-01-22 17:49:46                           
  User-Group                    : -                                             
  Next-hop                      : -                                             
  Policy-route-IPV6-address     : -                                             
                                                                                
AAA:                                                                            
  Server-template of second acct: -                                             
  Current authen method         : No authentication                             
  Authen result                 : Success                                       
  Current author method         : Idle                                          
  Author result                 : Idle                                          
  Action flag                   : Idle                                          
  Authen state                  : Authed                                        
  Author state                  : Idle                                          
  Configured accounting method  : No accounting                                 
  Quota-out                     : Offline                                       
  Current accounting method     : No accounting                                 
  Realtime-accounting-switch            : Close                                 
  Realtime-accounting-interval(sec)     : -                                     
  Realtime-accounting-send-update       : No                                    
  Realtime-accounting-traffic-update    : No                                    
  Accounting start time         : 2012-01-22 17:49:46                           
  Online time (h:min:sec)       : 00:32:41                                      
  Accounting state              : Ready                                         
  Accounting session ID         : HUAWEI030000000000004dce2aAAAAAA
  MTU                           : 1500                                          
  IPv6 MTU                      : 1500                                          
  Idle-cut direction            : Both                                          
  Idle-cut-data (time,rate,idle): 0 sec, 60 kbyte/min, 0 min 0 sec              
  Ipv4 Realtime speed           : 851840 kbyte/min                              
  Ipv4 Realtime speed inbound   : 367100 kbyte/min                              
  Ipv4 Realtime speed outbound  : 484740 kbyte/min                              
  Calling-station-id            : 8c:00:00:32:d8:d0                             
                                                                                
Dot1X:                                                                          
  User MSIDSN name              : -                                             
  EAP user                      : No                                            
  MD5 end                       : No                                            
                                                                                
VPN&Policy:                                                               
  Vpn-Instance                  : -                                             
                                                                                
Multicast Service:                                                              
  Multicast-profile             : -                                             
  Multicast-profile-ipv6        : -                                             
  Max Multicast List Number     : 4                                             
  IGMP enable                   : Yes                                           
  PIM-SM enable                 : No                                          
  PIM-SM-V6 enable              : Yes                                           
                                                                                
ACL&Qos:                                                                        
  Outbound QOS-profile-name     : 10m
  Outbound qos configuration    : User-queue
  Outbound cir                  : 10000(kbps)
  Outbound pir                  : 10000(kbps)
  Outbound user-queue insufficient slot : 1
  Effective slot : 1                       
   User-car outbound cir        : 10000
   User-car outbound pir        : 10000
   User-car outbound cbs        : 1870000
   User-car outbound pbs        : 1870000
  Link bandwidth auto adapt     : Disable                                       
  UpPriority                    : Unchangeable                                  
  DownPriority                  : Unchangeable                                  
                                                                                
Flow Statistic:                                                                 
  If flow info contain l2-head  : Yes                                           
  Flow-Statistic-Up             : Yes                                           
  Flow-Statistic-Down           : Yes                                           
  Up packets number(high,low)   : (0,102289012)                                 
  Up bytes number(high,low)     : (2,1638966608)                                
  Down packets number(high,low) : (0,125019212)                                 
  Down bytes number(high,low)   : (3,617173008)                                 
  IPV6 Up packets number(high,low)     : (0,0)                                  
  IPV6 Up bytes number(high,low)       : (0,0)                                  
  IPV6 Down packets number(high,low)   : (0,0)                                  
  IPV6 Down bytes number(high,low)     : (0,0)                                  
                                                                                
Value-added-service Flow Statistic:                                             
  BOD up packets number(high,low)           : (0,0)                             
  BOD up bytes number(high,low)             : (0,0)                             
  BOD down packets number(high,low)         : (0,0)                             
  BOD down bytes number(high,low)           : (0,0)                             
  BOD IPV6 Up packets number(high,low)      : (0,0)                             
  BOD IPV6 Up bytes number(high,low)        : (0,0)                             
  BOD IPV6 Down packets number(high,low)    : (0,0)                             
  BOD IPV6 Down bytes number(high,low)      : (0,0)                             
  DAA(level1) up packets number(high,low)   : (0,0)                             
  DAA(level1) up bytes number(high,low)     : (0,0)                             
  DAA(level1) down packets number(high,low) : (0,0)                             
  DAA(level1) down bytes number(high,low)   : (0,0)                             
  DAA(level2) up packets number(high,low)   : (0,0)                             
  DAA(level2) up bytes number(high,low)     : (0,0)                             
  DAA(level2) down packets number(high,low) : (0,0)                             
  DAA(level2) down bytes number(high,low)   : (0,0)                             
  DAA(level3) up packets number(high,low)   : (0,0)                             
  DAA(level3) up bytes number(high,low)     : (0,0)                             
  DAA(level3) down packets number(high,low) : (0,0)                             
  DAA(level3) down bytes number(high,low)   : (0,0)                             

Dslam information :                                                             
  Circuit ID                       :-                                           
  Remote ID                        :-                                           
  Actual datarate upstream         :0(Kbps)                                     
  Actual datarate downstream       :0(Kbps)                                     
  Min datarate upstream            :0(Kbps)                                     
  Min datarate downstream          :0(Kbps)                                     
  Attainable datarate upstream     :0(Kbps)                                     
  Attainable datarate downstream   :0(Kbps)                                     
  Max datarate upstream            :0(Kbps)                                     
  Max datarate downstream          :0(Kbps)                                     
  Min lowpower datarate upstream   :0(Kbps)                                     
  Min lowpower datarate downstream :0(Kbps)                                     
  Max delay upstream               :0(s)                                        
  Max delay downstream             :0(s)                                        
  Actual delay upstream            :0(s)                                        
  Actual delay downstream          :0(s)                                        
  Access loop encapsulation        :0x000000                                    
  -------------------------------------------------------------------           
  Are you sure to display some information?[Y/N]:
# Display summary information about access users in the IPv4 address pool p1.
<HUAWEI> display access-user ip-pool p1 summary
Normal users                       : 3
  RUI Local users                    : 0
  RUI Remote users                   : 0
  -----------------------------------------------
  Radius authentication              : 1 
  Radius proxy authentication        : 0 
  No authentication                  : 1 
  Local authentication               : 1 
  Tacacs authentication              : 0 
  -----------------------------------------------
  Total users                        : 3
Table 1 Description of the display access-user item command output
Item Description
Total users

Number of all access users.
IPv4 users

Number of IPv4 access users.
IPv6 users

Number of IPv6 access users.
IPv6 address

IPv6 address of the user.
IPv6 MTU

Maximum transmission unit for IPv6 users.
Dual-Stack users

Number of dual-stack access users.
Lac users

Number of LAC access users.
RUI local users

Number of local RUI users.
RUI remote users

Number of remote users whose information has been backed up.
RUI user state

Status of the remote backup profile bound to the RUI user.

  • Master: indicates that the remote backup profile bound to the RUI user is the master.
  • Slave: indicates that the remote backup profile bound to the RUI user is the slave.
  • -: indicates that users are non-RUI access users.
Wait authen-ack

Number of users waiting for the authentication response.
Wait leaving-flow-query

Number of users waiting for the leaving-flow query.
Wait accounting-start

Number of users waiting for the system to start accounting.
Wait accounting-stop

Number of users waiting for the system to stop accounting.
Wait authorization-client

Number of users waiting for the client's authorization.
Wait authorization-server

Number of users waiting for the server's authorization.
Authentication success

Number of users passing the authentication.
Accounting ready

Number of users for whom accounting is performed.
Accounting state

Accounting state.

  • Idle: idle state.
  • Ready: Accounting is ready to be performed.
  • Accounting: Accounting is being performed.
  • Leaving flow query: An offline traffic query response is being waited.
  • Wait acct start: An accounting start response is being waited.
Accounting start time

Time to perform accounting for users.
Accounting session ID

Specifies an accounting session ID.
state

State of the user entry.

  • Used: The user entry is being used.
  • Unused: The user entry is not used.
  • Active: The user entry is in a valid state.
  • Standby: The user entry is ready to be used.
Domain-name

Name of the domain to which a user belongs.
User access index

Index number of a user.
User name

User name.
User backuped from

User source.

  • Local: indicates that the user logs in to the local server.
  • Remote: indicates that the user logs in to the remote server.

If the user is not the RUI user, this field is not displayed.
User access PeVlan/CeVlan

Outer/inner VLAN tag of a QinQ packet.
User MAC

MAC address of a user.
User IP address

IP address of the user.
User IP netmask

Mask of the user IP address.
User gateway address

Gateway address of the user.
User Authen IP Type

IP address type that can be used for user authorization. The value is in the ipv4/ipv6/ipv6-pd format, and a dash (-) is displayed if an IP address type is not supported, such as ipv4/-/-.

ipv4: An IPv4 address can be assigned.

ipv6: An IPv6 address can be assigned.

ipv6-pd: An IPv6 prefix can be assigned.

-: No IP address or prefix can be assigned.
User Basic IP Type

Basic IP protocol of a user. The value is in the ipv4/ipv6/ipv6-pd format, and a dash (-) is displayed if a protocol is not the basic IP protocol, such as ipv4/-/-.

  • ipv4: IPv4 is a basic protocol.
  • ipv6: IPv6 is a basic protocol.
  • ipv6-pd: IPv6 PD is a basic protocol.
  • -: The protocol is not a basic protocol.
User access type

Access type of a user.
User authentication type

Authentication type of an access user.
User MSIDSN name

MSIDSN name of a user.
User access interface

Name of the interface through which a user accesses the device.
User access slot

User access slot.
Domain name

Name of the domain to which a user belongs.
Map domain name

Name of the domain before mapping.
Local authentication

Number of access users that adopt local authentication.
MAC

MAC address of the user.
IP address

IP address of the user.
Authen state

User authentication state.

  • Idle: idle state.
  • Authed: Authentication is complete.
  • Authen wait: The user is waiting to be authenticated.
  • Invalid: invalid authentication state.
Authen result

Authen result.
Server IP

IP address of the DHCPv4 server that allocates IP addresses to the user.
Remain lease(sec)

Remain lease(sec).
Agent-Circuit-Id

Specifies the agent-circuit-id (a sub-option of dhcpv4 option 82/dhcpv6 option18) value.
Agent-Remote-Id

Specifies the agent-remote-id (a sub-option of dhcpv4 option 82/dhcpv6 option37) value.
Access-line-id Information(dhcpv4 option82)

Access-line-id Information(dhcpv4 option82).
Access type

Access type of a user.
Access loop encapsulation

The encapsulation format of the access link.
Access start time

Time when a user accesses the device.
User-Group

Group to which a user belongs to.
Next-hop

Next-hop.
Policy-route-IPV6-address

Policy-route-IPV6-address.
Server-template of second acct

Server template used by a user for second accounting.
Current authen method

Current authentication mode.

  • Invalid: invalid authentication mode.
  • None: Authentication is not performed.
  • Local authentication: Authentication is performed on the local device.
  • RADIUS authentication: Authentication is performed on the RADIUS server.
  • HWTACACS authentication: Authentication is performed on the HWTACACS server.
Current accounting method

Accounting method being used by a user.
Current author method

Current author method.
No authentication

Number of access users that adopt no authentication.
Author result

Authorization result.

  • Failure: The authorization fails.
  • Success: The authorization succeeds.
  • Idle: Authorization is not performed.
Author state

Authorization state.

  • Idle: idle state.
  • Wait client-authorack: The server is waiting for the authorization response from the client.
  • Wait server-authorack: The client is waiting for the authorization response from the server.
  • Invalid: invalid authorization state.
Action flag

User action flag.

  • Idle: idle state.
  • New_user authen: new user authentication request processing.
  • User reauthen: user re-authentication processing.
  • Logout: logout processing.
  • Leaving: offline processing.
  • Author modify: authorization delivery processing.
  • User up: online request processing.
  • Invalid: invalid action.
Configured accounting method

Configured accounting mode.

  • No accounting: No accounting is performed.
  • Local accounting: Accounting is performed on the local device.
  • RADIUS accounting: Accounting is performed on the RADIUS server.
  • Local RADIUS accounting: Accounting is performed on both the local device and RADIUS accounting server.
  • HWTACACS accounting: Accounting is performed on the HWTACACS accounting server.
  • Local HWTACACS accounting: Accounting is performed on both the local device and HWTACACS accounting server.
  • Invalid: invalid accounting mode.
Quota-out

Policy to be adopted in case that the quota is used up.
Realtime-accounting-switch

Whether real-time accounting is enabled.
Realtime-accounting-interval(sec)

Real-time accounting interval.
Realtime-accounting-send-update

Whether the device sends real-time accounting packets immediately after receiving an accounting reply packet.
Online time (h:min:sec)

Duration a user is online.
MTU

Maximum transmission unit for IPv4 users.
Idle-cut direction

Idle-cut direction.
Idle-cut-data (time,rate,idle)

Parameters of idle cut in the current domain.
Ipv4 Realtime speed

Real-time traffic rate of IPv4 access users.

If the ui-mode type2 command is run, the displayed value of this field is in kbit/s rather than in kbyte/min.
Ipv4 Realtime speed inbound

Real-time rate of traffic sent by IPv4 access users.

If the ui-mode type2 command is run, the displayed value of this field is in kbit/s rather than in kbyte/min.
Ipv4 Realtime speed outbound

Real-time rate of traffic sent to IPv4 access users.

If the ui-mode type2 command is run, the displayed value of this field is in kbit/s rather than in kbyte/min.
Calling-station-id

Calling-Station-Id attribute for users.
EAP user

Whether the user is an EAP user.
MD5 end

Whether the user information is terminated through EAP.
Vpn-Instance

Name of a VPN instance.
Multicast Service

Multicast Service.
Multicast-profile

Multicast profile used by users in the current domain.
Multicast-profile-ipv6

Multicast profile used by IPv6 users in the current domain.
Max Multicast List Number

Maximum number of multicast profiles that can be bound to a domain.
Max datarate upstream

Maximum upstream traffic rate on the access link.
Max datarate downstream

Maximum downstream traffic rate on the access link.
Max delay upstream

Maximum upstream delay on the access link.
Max delay downstream

Maximum downstream delay on the access link.
IGMP enable

Whether IGMP is enabled.
PIM-SM enable

Whether PIM-SM-V4 is enabled.
PIM-SM-V6 enable

Whether PIM-SM-V6 is enabled.
Outbound QOS-profile-name

Outbound QOS-profile-name.
Outbound qos configuration

Outbound qos configuration.
Outbound pir

Outbound pir.
Outbound user-queue insufficient slot

Outbound user-queue insufficient slot.
Effective slot

ID of the slot with insufficient resources and actually used resources (displayed only in the case of insufficient resources):

  • User-queue inbound cir: upstream CIR for SQs.
  • User-queue inbound pir: upstream PIR for SQs.
  • User-queue outbound cir: downstream CIR for SQs.
  • User-queue outbound pir: downstream PIR for SQs.
  • User-car inbound cir: upstream CIR for domain users.
  • User-car inbound pir: upstream PIR for domain users.
  • User-car inbound cbs: upstream CBS for domain users.
  • User-car inbound pbs: upstream PBS for domain users.
  • User-car outbound cir: downstream CIR for domain users.
  • User-car outbound pir: downstream PIR for domain users.
  • User-car outbound cbs: downstream CBS for domain users.
  • User-car outbound pbs: downstream PBS for domain users.
  • Family-car inbound cir: upstream CIR for family users.
  • Family-car inbound pir: upstream PIR for family users.
  • Family-car inbound cbs: upstream CBS for family users.
  • Family-car inbound pbs: upstream PBS for family users.
  • Family-car outbound cir: downstream CIR for family users.
  • Family-car outbound pir: downstream PIR for family users.
  • Family-car outbound cbs: downstream CBS for family users.
  • Family-car outbound pbs: downstream PBS for family users.
Link bandwidth auto adapt

Automatic adaptation of link bandwidth.
UpPriority

Priority of traffic sent by access users.
DownPriority

Priority of traffic sent to access users.
Flow Statistic

Flow Statistic.
If flow info contain l2-head

Whether a packet contains a layer 2 header.
Flow-Statistic-Up

Statistics about traffic sent by access users.
Flow-Statistic-Down

Statistics about traffic sent to access users.
Up packets number(high,low)

Number of packets sent by IPv4 users.

The formula is as follows: Number of packets = 4294967296 x high + low. For example, if high is 1 and low is 705032704, the number of packets = 1 x 4294967296 + 705032704 = 5000000000.

  • The maximum value of low is 4294967295.
  • The maximum value of high is 4294967295.
Up bytes number(high,low)

Number of bytes sent by IPv4 users.

The formula is as follows: Number of bytes = 4294967296 x high + low. For example, if high is 1 and low is 705032704, the number of bytes = 1 x 4294967296 + 705032704 = 5000000000.

  • The maximum value of low is 4294967295.
  • The maximum value of high is 4294967295.
Down packets number(high,low)

Number of packets sent to IPv4 users.

The formula is as follows: Number of packets = 4294967296 x high + low. For example, if high is 1 and low is 705032704, the number of packets = 1 x 4294967296 + 705032704 = 5000000000.

  • The maximum value of low is 4294967295.
  • The maximum value of high is 4294967295.
Down bytes number(high,low)

Number of bytes sent to IPv4 users.

The formula is as follows: Number of bytes = 4294967296 x high + low. For example, if high is 1 and low is 705032704, the number of bytes = 1 x 4294967296 + 705032704 = 5000000000.

  • The maximum value of low is 4294967295.
  • The maximum value of high is 4294967295.
IPV6 Up packets number(high,low)

Number of packets sent by IPv6 users.

The formula is as follows: Number of packets = 4294967296 x high + low. For example, if high is 1 and low is 705032704, the number of packets = 1 x 4294967296 + 705032704 = 5000000000.

  • The maximum value of low is 4294967295.
  • The maximum value of high is 4294967295.
IPV6 Up bytes number(high,low)

Number of bytes sent by IPv6 users.

The formula is as follows: Number of bytes = 4294967296 x high + low. For example, if high is 1 and low is 705032704, the number of bytes = 1 x 4294967296 + 705032704 = 5000000000.

  • The maximum value of low is 4294967295.
  • The maximum value of high is 4294967295.
IPV6 Down packets number(high,low)

Number of packets sent to IPv6 users.

The formula is as follows: Number of packets = 4294967296 x high + low. For example, if high is 1 and low is 705032704, the number of packets = 1 x 4294967296 + 705032704 = 5000000000.

  • The maximum value of low is 4294967295.
  • The maximum value of high is 4294967295.
IPV6 Down bytes number(high,low)

Number of bytes sent to IPv6 users.

The formula is as follows: Number of bytes = 4294967296 x high + low. For example, if high is 1 and low is 705032704, the number of bytes = 1 x 4294967296 + 705032704 = 5000000000.

  • The maximum value of low is 4294967295.
  • The maximum value of high is 4294967295.
Value-added-service Flow Statistic

Value-added-service Flow Statistic.
BOD Up packets number(high,low)

Number of the BoD service packets sent by IPv4 users.
BOD Up bytes number(high,low)

Number of the BoD service bytes sent by IPv4 users.
BOD Down packets number(high,low)

Number of the BoD service packets sent to IPv4 users.
BOD Down bytes number(high,low)

Number of the BoD service bytes sent to IPv4 users.
BOD IPV6 Up packets number(high,low)

Number of the BoD service packets sent by IPv6 users.
BOD IPV6 Up bytes number(high,low)

Number of the BoD service bytes sent by IPv6 users.
BOD IPV6 Down packets number(high,low)

Number of the BoD service packets sent to IPv6 users.
BOD IPV6 Down bytes number(high,low)

Number of the BoD service bytes sent to IPv6 users.
DAA(level1) Up packets number(high,low)

Number of the DAA service packets sent by tariff level one users.
DAA(level1) Up bytes number(high,low)

Number of the DAA service bytes sent by tariff level one users.
DAA(level1) Down packets number(high,low)

Number of the DAA service packets sent to tariff level one users.
DAA(level1) Down bytes number(high,low)

Number of the DAA service bytes sent to tariff level one users.
Dslam information

Dslam information.
Circuit ID

ID of an attachment circuit.
Remote ID

ID of a remote agent.
Actual datarate upstream

Actual upstream traffic rate on the access link.
Actual datarate downstream

Actual downstream traffic rate on the access link.
Actual delay upstream

Actual upstream delay on the access link.
Actual delay downstream

Actual downstream delay on the access link.
Min datarate upstream

Minimum upstream traffic rate on the access link.
Min datarate downstream

Minimum downstream traffic rate on the access link.
Min lowpower datarate upstream

Minimum upstream traffic rate in the low power state on the access link.
Min lowpower datarate downstream

Minimum downstream traffic rate in the low power state on the access link.
Attainable datarate upstream

Attainable upstream traffic rate on the access link.
Attainable datarate downstream

Attainable downstream traffic rate on the access link.
UserID

User ID.
Username

User name.
Interface

Name of the interface through which a user accesses the device.
Vlan

Vlan ID.
Normal users

Number of users whose information is not backed up.
Radius authentication

Number of access users that adopt RADIUS authentication.
Radius proxy authentication

Number of access users that adopt RADIUS proxy authentication.
Tacacs authentication

Number of access users that adopt Tacacs authentication.
Online-User

Number of online users.
AAA

AAA.
Dot1X

Dot1X.
ACL&Qos

ACL&Qos.
Parent Topic: AAA and User Management Configuration Commands (Administrative User)
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >