display access-user rate-limit-info

Function

The display access-user rate-limit-info command displays rate limit information of all users.

This command is supported only on the NetEngine 8000 F1A.

Format

display access-user rate-limit-info [ rate-limit-value ] [ inbound | outbound ]

Parameters

Parameter	Description	Value
rate-limit-value	Specifies a rate limit value.	The value is an integer ranging from 0 to 4294967294.
inbound	Specifies inbound direction.	-
outbound	Specifies outbound direction.	-

Parameter

Description

Value

rate-limit-value

Specifies a rate limit value.

The value is an integer ranging from 0 to 4294967294.

inbound

Specifies inbound direction.

outbound

Specifies outbound direction.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
aaa-access	read

Usage Guidelines

Usage Scenario

To view rate limit information of all users on the device, run the display access-user rate-limit-info command. This command is not applicable to Layer 2 or Layer 3 leased line users.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display rate limit information of all users.

<HUAWEI> display access-user rate-limit-info
RateType(K)  RatePeak(K/S) RateAverage(K/S) Percent  Users     Direction  
-------------------------------------------------------------------------------------------------------
200          180           160              80%      100       inbound    
500          380           260              52%      200       inbound   
10240        10240         10240            100%     500       inbound 
20480        10240         10240            50%      10        inbound 
-------------------------------------------------------------------------------------------------------
200          180           160              80%      100       outbound    
500          380           260              52%      200       outbound    
10240        10240         10240            100%     500       outbound    
20480        10240         10240            50%      10        outbound

**Table 1** Description of the **display access-user rate-limit-info** command output
Item	Description
RateType(K)	Rate limit.
RatePeak(K/S)	Peak rate of all users.
RateAverage(K/S)	Average rate of all users.
Percent	Percentage of the user rate to the total bandwidth. 100% is displayed if the actual user rate is higher than the committed user rate.
Users	Number of users using a tariff package.
Direction	Rate limiting direction.