display arp rate-limit interface

Function

The display arp rate-limit interface command displays the ARP packet rate limit of an interface.

Format

display arp rate-limit interface { interface-type interface-num | interface-name }

Parameters

Parameter	Description	Value
interface interface-type interface-num	Specifies the type and number of the interface on which ARP packet rate limit is configured.	-

Parameter

Description

Value

interface interface-type interface-num

Specifies the type and number of the interface on which ARP packet rate limit is configured.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
hostdefend	read

Usage Guidelines

Usage Scenario

This command displays the ARP packet rate limit of an interface configured by running the arp rate-limit command.

This command is not applicable to Layer 2 Ethernet interfaces, flexible access interfaces, QinQ stacking interfaces, or QinQ mapping interfaces, or EVC sub-interfaces.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the ARP packet rate limit of GE 0/1/0.

<HUAWEI> display arp rate-limit interface GigabitEthernet 0/1/0
Interface: GigabitEthernet0/1/0
arp rate-limit: 20(default-value)

**Table 1** Description of the **display arp rate-limit interface** command output
Item	Description
arp rate-limit	Specifies the ARP packet rate limit of an interface. When the threshold is reached, perform the CAR operation for the packets. The value is an integer, in pps. The value is 0 or ranges 21 to 1024. If the value is 0, no CAR operation is performed for ARP packets.
Interface	Specifies the type and number of the interface.