display call rate

Format

display call rate

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
aaa-access	read

Usage Guidelines

Usage Scenario

When you collect statistics about network operation quality, using the display call rate command can display the call put-through rate for various types of users.

The output of the display call rate command includes the number of calls, number of successful calls, and call put-through rate for various types of users.

Precautions

If a certain type of users is not configured on the device, the displayed statistics about the type of users are all 0, including the number of calls, number of successful calls, and call put-through rate.

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the put-through rate of all types of users.

<HUAWEI> display call rate
 User callrate:
 --------------------------------------------------------
 Usertype      Calltime      Callcompletion      Rate
 --------------------------------------------------------
 PPP             127                127         100.00%
 Dot1X           324                324         100.00%
 Web/Fast        7                   7          100.00%
 Bind            0                   0           0.00%
 Total           458                458         100.00%

**Table 1** Description of the **display call rate** command output
Item	Description
User callrate	User call rate information.
Usertype	Indicates the user type. The values are as follows:
Calltime	Indicates the number of calls made by a user.
Callcompletion	Indicates the number of successful calls made by a user.
Rate	Indicates the ratio of successful calls.
Total	Indicates the total put-through rate of all types of users.