display cusp session

Function

The display cusp session command displays CUSP session information.

This command is supported only on the NetEngine 8000 F1A.

Format

display cusp session

Parameters

None

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
cusp-agent	read

Usage Guidelines

Usage Scenario

To check CUSP session information, run the display cusp session command. The command output helps check whether a CUSP connection is successfully established.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display CUSP session information.

<HUAWEI> display cusp session
2017-12-15 15:28:55.976 
--------------------------------------------------------------------------------
 Agent           Controller      UpTime       State
--------------------------------------------------------------------------------
 192.168.1.3     192.168.1.5     0d03h39m52s  REGISTERED
--------------------------------------------------------------------------------

**Table 1** Description of the **display cusp session** command output
Item	Description
Agent	-
Controller	-
UpTime	-
State	-