display dhcp-server item

Function

The display dhcp-server item command displays information about a DHCPv4 server.

This command is supported only on the NetEngine 8000 F1A.

Format

display dhcp-server item ip-address [ vpn-instance vpn-instance-name ]

Parameters

Parameter Description Value
ip-address

Specifies the IP address of a DHCPv4 server.

The value is in the dotted decimal format.

vpn-instance vpn-instance-name

Specifies the VPN instance name.

The value is a string of 1 to 31 case-sensitive characters.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name Operations
dhcp read

Usage Guidelines

Usage Scenario

To display the current status of a DHCPv4 server and speed limit information, run the **display dhcp-server item ** command.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display the current status of the DHCPv4 server whose IP address is 1.2.3.4.
<HUAWEI> display dhcp-server item 1.2.3.4
  IPAddress   : 1.2.3.4
  State       :  UP
  Speed Limit : 0 packets / 0 seconds
  Dead Count  : 0
  Timeout     : 25(Sec)
  Dead Time   : 3(Min)
  Nak Count   : 10  
  Vpn Instance: yl
Table 1 Description of the display dhcp-server item command output
Item Description
Instance

instance.

IPAddress

IP addresses of the DHCPv4 server.

State

DHCPv4 server status.

Speed Limit

Speed limit information of the DHCPv4 server.

Dead Count

Maximum number of times at which the DHCPv4 server does not send response packets.

Dead Time

Down time of a DHCPv4 server.

Timeout

Timeout period during which a device receives no response from the DHCPv4 server.

Nak Count

nak count.

Vpn Instance

Name of the VPN instance to which the DHCPv4 server belongs to.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >