display dot1x supplicant template

Format

display dot1x supplicant template dot1x-supplicant-template-number

Parameters

Parameter	Description	Value
dot1x-supplicant-template-number	Specifies the number of an 802.1x supplicant template.	The value is an integer. The device supports one 802.1X supplicant template, so the value is 1.

Parameter

Description

Value

dot1x-supplicant-template-number

Specifies the number of an 802.1x supplicant template.

The value is an integer. The device supports one 802.1X supplicant template, so the value is 1.

Views

All views

Default Level

1: Monitoring level

Task Name and Operations

Task Name	Operations
dot1x	read

Usage Guidelines

Usage Scenario

After an 802.1X supplicant template is configured on a device, you can run the display dot1x supplicant template command to check parameters for 802.1X authentication negotiation defined in the 802.1X supplicant template.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

The actual command output varies according to the device. The command output here is only an example.

# Display parameters for 802.1X authentication negotiation defined in 802.1X supplicant template 1.

<HUAWEI> display dot1x supplicant template 1
-------------------------------------------------------
Template index:                                 1
Eap authentication type:                        chap
Username:                                       huawei
Start packet interval:                          30s
Authentication interval:                        30s
Held interval:                                  60s
Portocol version type:                          1
---------------------------------------------------------

**Table 1** Description of the **display dot1x supplicant template** command output
Item	Description
Template index	Number of the 802.1X supplicant template.
Eap authentication type	EAP authentication. The value can be: PAP: Passwords in plain text are used, providing low security. CHAP: Passwords in cipher text are used, providing higher security than PAP.
Start packet interval	Interval at which EAP-Start packets are sent, in seconds.
Authentication interval	Authentication interval, in seconds.
Held interval	Interval at which negotiation is suspended after an authentication failure, in seconds.
Portocol version type	Version of the 802.1x protocol.
Username	User name.